MULTI SCREEN Operations
Showing a couple of pictures on the screen at the same time
*An
1.Press the MULTI button to select a screen mode from among single mode, side by side, and picture in picture.
Side by side 1
VIDEO1 RGB/PC1
A | B |
|
|
|
|
VIDEO1 RGB/PC1
A | B |
|
|
|
|
VIDEO1 RGB/PC1
A | B |
|
|
|
|
Selecting the input signals to be displayed
Press the cursor buttons on the remote control unit to switch either side by side 1 (with ) or side by side 2 (with ).
Note:
Picture A and B on the above screen are not always of the same height.
Side by side 2
|
|
|
|
|
|
|
| VIDEO1 |
|
|
| RGB/PC1 |
|
|
|
|
|
|
|
|
Sub screen |
|
| Main screen | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.Press the SELECT button to make the desired picture active.
2.Press the RGB/PC, VIDEO, or DVD/HD button. Each press of the button changes the selection of the input signal.
The INPUT SELECT button on the monitor can also be used to change the selection.
Adjusting the OSM controls
1.Press the PROCEED button to display the MAIN MENU.
2.Adjust the setting to your preference.
For details, see “OSM (On Screen Menu) Controls” on page 17.
Picture in picture
VIDEO1 |
|
| RGB/PC1 |
|
|
|
|
Main screen
Sub screen
Press the cursor buttons on the remote control unit to switch the position of the sub screen.
VIDEO1 |
|
| RGB/PC1 |
|
|
|
|
Main screen
Sub screen
2.If you wish to switch the setting of the picture, press the SELECT button to make the desired picture active.
Each press of the SELECT button changes the selection |
|
of the active picture. | 16 |
|
Note:
During multi mode, Auto Adjust does not affect the screen.
Information
Positioning on the screen (for side by side) Depending on the
Pictures displayed
on the left ........ VIDEO1, VIDEO2, VIDEO3, HD1/
DVD1/DTV1, or HD2/DVD2/
DTV2
Pictures displayed
on the right ...... RGB/PC1, RGB/PC2, RGB/PC3
Positioning on the screen (for picture in picture)
Pictures displayed
Main screen .... RGB/PC1, RGB/PC2, RGB/PC3 Sub screen ...... VIDEO1, VIDEO 2, VIDEO 3,
HD 1/DVD 1/DTV 1, or HD 2/
DVD 2/DTV 2
Multi screen operations may not function depending on the type of the RGB signals.