Information
⬛PLE
AUTO .............. The brightness of the screen is
adjusted automatically to suit the picture quality.
LOCK .............. The brightness level is set to
minimum.
⬛ORBITER
ON | The picture moves around the screen |
| intermittently. |
OFF | Orbiter mode does not function. |
⬛INVERSE
ON | The picture is displayed alternately |
| between positive image and negative |
| image. |
OFF | Inverse mode does not function. |
WT | The entire screen turns white. |
⬛Restoring the factory default settings
Select “RESET” from the function menu. Note that this also restores other settings to the factory defaults.
Resetting to the default values
Use these operations to restore all the picture adjustments, audio settings, to the factory default values.
Refer to page 18 for items to be reset.
Press the PROCEED button on the remote control unit to
display the MAIN MENU on the screen, then...
1.Use the ▲ and ▼ buttons to select “FUNCTION”, then press the PROCEED button.
The “FUNCTION” screen appears.
2.Use the ▲ and ▼ buttons to select “RESET”, then press the PROCEED button.
F U N C T I O N
OSM | : | ON |
OSM ADJ. | : | 1 |
POWER MGT | : | OFF |
GRAY LEVEL | : | 3 |
CINEMA MODE | : | ON |
RGB3 ADJ. | : | 1 |
LONG LIFE
RESET
SEL. PROCEED OK EXIT RETURN
The “RESET” screen appears.
3.Use the ▲ and ▼ buttons to select “RESET”, then press the PROCEED button.
R E S E T
RESET
RETURN
PROCEED OK EXIT RETURN
R E S E T
SETTING NOW
When the “SETTING NOW” screen disappears, the screen will be restored to the previous “RESET” mode, then all the settings are restored to the default values.
4.Once the setting is completed ...
Press the EXIT button.
To delete the main menu, press the EXIT button once more.
32