NEC 50MP1 user manual Watching computer images with a wide screen, When Picture Size is set to OFF

Page 22

Watching computer images with a wide screen

Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen.

1.Press the WIDE button on the remote control unit.

2.Within 3 seconds ...

Press the WIDE button again.

The screen size switches as follows:

→ NORMAL → FULL

NORMAL size screen (4:3 or SXGA 5:4)

The picture has the same size as the normal computer image.

FULL size screen

The image is expanded in the horizontal direction.

When wide signals are input.

FULL size screen

When “PICTURE SIZE” is set to “OFF”

The screen size switches as follows:

→TRUE → FULL

TRUE size screen (VGA, SVGA 4:3)

The image is true resolution.

FULL size screen

The image is expanded in the horizontal and vertical direction.

When wide signals are input.

TRUE

The image is true resolution.

FULL

Information

Supported resolution

See page 47 for details on the display output of the various VESA signal standards supported by the monitor.

“PICTURE SIZE” setting

When the setting of “PICTURE SIZE” is OFF, the size of RGB-input pictures will be TRUE in place of

NORMAL.

When 852 (848) dot 480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are in- put

Select an appropriate setting for RGB SELECT mode referring to the“Table for Signals Supported” on page 47.

*“ IBM PC/AT” and “VGA” are registered trademarks of IBM, Inc. of the United States.

15

Image 22

Contents User’s Manual Precautions Important InformationTo avoid damage and prolong operating life Mises en garde et précautions de sécurité PrécautionsDOC avis de conformation AvertissementRemarque Limited Warranty Plasma Monitors Contents How to Attach Options to the Plasma Monitor Ventilation Requirements for enclosure mountingIntroduction Features you’ll enjoy includeContents of the Package Introduction to the PlasmaSync 50MP1 Plasma MonitorPart Names and Function Front ViewRear View/ Terminal Board RGBRemote Control Unit RGB/PCBattery Installation and Replacement 5MULTIOperating Range Using the wired remote control modeHandling the remote control unit Approx 7m/ 23ftInstallation Personal computer with a digital RGB outputConnecting Your DVD Player Connecting Your Document CameraConnecting Your VCR or Laser Disc Player Connections with Equipment that has a Digital InterfaceExternal Speaker Connections Right LeftPin Assignments and Signal Levels for 15 pin RGB Analog RGBBasic Operations After the power is turned off with the off timer To set the off timerTo cancel the off timer To check the remaining timeWide Operations When watching videos or digital video discsWhen watching high definition video source Watching with a wide screen manual Picture Size setting When Picture Size is set to OFF Supported resolution Watching computer images with a wide screenMulti Screen Operations Selecting the input signals to be displayedAdjusting the OSM controls Showing a couple of pictures on the screen at the same timeOSMOn Screen Menu Controls Menu OperationsMain menu Sub menu Functions Picture adjustment screen Picture Settings MenuAdjusting the picture Adjusting the computer imageExample Setting the Theater mode Types of picture modesOnce the setting is completed Setting the color temperatureExample Setting Setting the color temperatureExample Adjusting the White Balance Adjusting the color to the desired quality Adjusting the white balance NR Example Setting NR-3Reducing noise in the picture Types of noise reductionExample Adjusting the bass Sound Settings MenuAdjusting the treble, bass and left/right balance Sound settings menuExample Adjusting the vertical position in the normal mode Screen Settings MenuAdjusting the Position, Size, Fine Picture, PictureAdj When Auto Picture is OFFFunction Settings Menu Setting the on-screen displayTo adjust the position Adjusting the position of the menu displayExample Adjusting the position of the menu display Adjusting the position of the menu displayPower management function Setting the power management for computer imagesExample Turning the power management function on Power management settingsPOWER/STANDBY indicator Description Turning the picture back onExample Setting the Cinema Mode to OFF Setting the picture to suit the movieExample Adjusting the Gray Level Cinema ModeWhen you adjust the RGB3 ADJ Setting RGB3 ADJExample Setting PLE to Lock Reducing burn-in of the screenOrbiter Resetting to the default valuesPLE InverseSetting the BNC connectors Option Settings MenuSetting the allocation of the audio connectors Audio InputTo set the RGB select mode to Motion Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion BNC SelectRGB Select modes Setting high definition images to the suitable screen sizeExample Setting the 1080B mode to HD Select modesInformation Menu Setting the picture size for RGB input signalsExample Setting the on mode to OFF Picture SizeExample Setting the menu display to Deutsch Setting the language for the menusSetting the video signal format Example Setting the video signal format to 3.58 NtscVideo signal formats NtscApplication Type of connector D-Sub 9-pin maleExternal Control ConnectionsCommunication Format CommandCheck Sum CKS, Error Processing, and ACK Unit ID 1 and Unit IDCommand Reference List OSM Select Audio Mute OnAudio Mute Off Color Gain DataContrast Gain Data Input Mode RequestSharpness Gain Data Bright Gain DataBlue Gain Data RED Gain DataGreen Gain Data Multi Screen SelectVideo ADJ Request Audio Select Request Failure Mode RequestAudio Select Set Long Life SetSupported resolution Table of Signals SupportedComputer input signals supported by this system Page Troubleshooting Symptom Checks RemedySpecifications SignalsPage Page NEC T