NEC 50MP1 Setting the color temperature, Example Setting, Once the setting is completed

Setting the color temperature

Use this procedure to set color tone produced by the plasma display.

Example: Setting “1”

Press the PROCEED button on the remote control unit to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “PICTURE”, then press the PROCEED button.

The “PICTURE” screen appears.

2.Use the ▲ and ▼ buttons to select “COLOR TEMP.”.

P I C T U R E

CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT		R				G
PICTURE MODE		:		MEMORY
COLOR TEMP.		:	2
NR		: OFF
SEL.	ADJ.				RETURN
				EXIT

3.Use the
and  buttons to select “1”.

The mode switches as follows when the
and  buttons are pressed:

→ 1 ↔ 2 ↔ 3 ↔ PRO ←

* See page 22 to set “PRO”.

4.Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

Setting the color temperature

1	High (bluer)
2	Middle (Standard)
3	Low (redder)

Restoring the factory default settings

Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.

COLOR TEMP. : 1

*If neither the
or  button is pressed within 5 seconds, the current selection is set and the previous screen reappears.

21