Adjusting the Position, Fine Picture, Picture Adj and Auto Picture of a computer image
When a computer image is displayed, the position of the image can be adjusted and flickering of the image can be corrected.
4.To adjust the vertical position ...
Use the ▲ and ▼ buttons to select
R G B A D J .
Example: Adjusting the vertical position in the normal mode
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
MODE:
AUTO PICTURE :
RETURN
NORMAL
SEL.
ONADJ.
MENU EXIT
1.Use the ▲ and ▼ buttons to select “SCREEN”, then press the “OK” button.
The “SCREEN” menu appears.
2.Use the ▲ and ▼ buttons to select “RGB ADJ.”, then press the “OK” button.
S C R E E N
W I D E A D J .
R G B A D J .
O S M A D J .
R E T U R N
SEL.
O K OK
MENU EXIT
The “RGB ADJ.” screen appears.
3.To adjust the normal mode ...
Use the ◀ and ▶ buttons to select “NORMAL”.
The mode switches as follows when the ◀ and ▶ but- tons are pressed:
→ NORMAL ↔ FULL ←
R G B A D J .
5. Adjust using the ◀ and ▶ buttons.
V – P O S I T I O N
*If neither the ◀ or ▶ button is pressed within 5 sec- onds, the current adjustment is set and the previous screen reappears.
To continue making other computer image adjustments
...
Repeat from step 4.
6.Press the "OK" button.
The vertical position of the computer's image has now been adjusted.
R G B A D J .
MODE | : NORMAL |
: | |
: |
MODE:
AUTO PICTURE :
RETURN
NORMAL
SEL.
ONADJ.
MENU EXIT
FINE PICTURE :
PICTURE ADJ. :
AUTO PICTURE : ON
RETURN
7.Once all adjustments are completed ...
Press the “MENU” button. All menus disappear.
*The mode can also be switched by pressing the “WIDE/AUTO WIDE” button on the remote control- ler.
26