NEC 4210W Setting a computer image to the correct RGB se- lect screen, RGB Select modes

Setting a computer image to the correct RGB se- lect screen

On the computer image select the RGB mode, moving im- age (video) mode, wide mode or digital broadcast.

Example: Setting the RGB SELECT mode to “VIDEO”

Press the MENU button on the remote controller to dis-

play the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “FUNCTION”, then press the “OK” button.

The “FUNCTION” screen appears.

2.Use the ▲ and ▼ buttons to select “RGB SELECT”.

F U N C T I O N
POWER MGT	:	OFF
RGB SELECT	:	RGB
HD SELECT	:	1080I
OSM	:	ON
GRAY LEVEL	:	3
PLE MODE	:	AUTO	SEL.
RESET			ADJ.
RETURN			MENU EXIT

3.To set the RGB select mode to “VIDEO” ...

Use the ◀ and ▶ buttons to select “VIDEO”.

The mode switches as follows each time the ◀ or ▶ button is pressed:

⎯ RGB ↔ VIDEO ↔ WIDE ↔ DTV ⎯

F U N C T I O N
POWER MGT	:	OFF
RGB SELECT	:	VIDEO
HD SELECT	:	1080I
OSM	:	ON
GRAY LEVEL	:	3
PLE	:	AUTO	SEL.
RESET			ADJ.
RETURN			MENU EXIT

4.Once the setting is completed ...

Press the “MENU” button.

The RGB select mode is set to “VIDEO”, and the menu disappears.

Information

⬛RGB SELECT modes

These 4 mode are not displayed in correct image auto- matically.

RGB	VESA 640×480@60Hz (Use this mode
	for normal computer images.)
VIDEO	To display the video signal that is converted
	to the RGB signal, set this mode.
WIDE	When an 852 dot× 480 line signal with a
	vertical frequency of 31.72 KHz is input,
	the image may be compressed horizontally.
	To prevent this, set RGB SELECT to
	WIDE.
DTV	Set this model when watching digital broad
	casting (480P).

⬛Restoring the factory default settings

Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.

31