Routing Your TV’s Power Cord and AV Cable Through the Cable Management System
Routing and Connecting Your TV’s Power Cord
1)Once your mount and TV are completely installed, fully extend the mount’s swing arms from the wall and swivel your TV left or right.
2)Connect your TV’s power cord to the TV (if TV uses
3)Remove the end cap from the PowerMount’s bottom swing arm. Next, slide off the bottom arm’s cable management cover.
4)Route the TV power cord through the arm, as shown. Once completed, reattach the cable management cover and end cap.
5)Plug the TV power cord into one of the power unit’s AC outlets.
6)Plug the PowerMount’s attached 8ft. power cord into a nearby AC wall outlet.
7)LED indicators on the PowerMount should illuminate.
8)“Clean Power ON” indicates Clean Power filtering is active.
9)“Ground OK” indicates house wiring and/or AC outlet is properly grounded. If not illuminated, unplug PowerMount and consult an electrician.
28