Hitachi 55HDX62, 42HDX62A Use the Cursor PAD To select Other from brand name choices

On-Screen Display

Setup

5. Use the CURSOR PAD					or		to select
	“Other” from brand name choices.
6. Use the CURSOR PAD					or		to highlight
	“Learning Mode” then press the SELECT
	button.
		AV Net Setup Wizard : A/V Receiver Setup
		Please choose the Brand Name of your
		A/V Receiver. If you can not find the
		Brand Name, please choose “Other” and
		proceed to the Learning mode by pushing
		the Learning Mode Button.
		Brand Name		Other
				Learning Mode
					Back		Next
		Move	Change Brand Name
7. Use the CURSOR PAD					,	,	and	to
	select the Soft Key to learn (Ex. VOL							), then
	press the SELECT button.
		AV Net Setup Wizard : Custom Settings
		Select the A/V Receiver softkey to learn?
			TV Softkeys
		POWER	CH	VOL
		MUTE	CH	VOL	AUDIO
		SOURCE 1	SOURCE 2	SOURCE 3	SOURCE 4	SOURCE 5
		SOURCE 6	SOURCE 7	SOURCE 8	SOURCE 9	SOURCE 10
					Back		Done
		Move SEL Select
8. Press and hold the VOL					button of your A/V

Receiver remote control while pointing directly at the learning AV NET sensor of the Plasma TV (located at the lower right corner of the screen) at a distance of 5 to 10 feet or 2 to 3 meters.

AV Net Setup Wizard : A/V Receiver Setup

Press and hold desired button to transfer the command to AV NET.

VOL

Please wait while AV NET

Learns the command....

Move SEL Select

9.If the IR code transfer was not completed, the screen below appears. Repeat step 8 to try again.

AV Net Setup Wizard : A/V Receiver Setup

VOL

Transfer not completed!

Try again?

Cancel OK

Move SEL Select

10.If the IR code transfer was successful, the screen below appears, then select “OK” to continue setup.

AV Net Setup Wizard : A/V Receiver Setup

VOL

Transfer was successful.

Press OK to store and continue.

Cancel OK

Move SEL Select

11.Select another Soft Key to learn or select DONE to move on to the next screen.

AV Net Setup Wizard : Custom Settings

Select the A/V Receiver softkey to learn?

TV Softkeys

POWER	CH	VOL
MUTE	CH	VOL	AUDIO
SOURCE 1	SOURCE 2	SOURCE 3	SOURCE 4	SOURCE 5
SOURCE 6	SOURCE 7	SOURCE 8	SOURCE 9	SOURCE 10
			Back		Done
Move	SEL Select

12. Select the Test button VOL				to check the
response of the device to this command.
13. Use the CURSOR PAD			,	,	and	to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
	AV Net Setup Wizard : A/V Receiver Setup
	Select the Test button. If device
	responds to this command, proceed to
	“Next”. Otherwise, try another IR
	Code Set number.
	Brand Name	Other
	IR Code Set	Other
		Learning Mode
	Test Button	POWER	SOURCE 1	VOL
				Back	Next
	Move SEL IR Out
14. Use the CURSOR PAD			or		to select the TV
Input that connects to the video and audio
output of the A/V Receiver.
15. Use the CURSOR PAD			,	,	and	to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
	AV Net Setup Wizard : A/V Receiver Setup
	Brand Name	Other
	IR Code Set	Other
	TV Input Settings
	If you connect the video or audio
	output of the A/V Receiver to this TV,
	please select a TV Input.
	TV Input	Not Connected
				Back	Next
	Move	Change Input	SEL Select

86