Hitachi 42HDX62A, 55HDX62 important safety instructions Front/Rear/Side Panel Controls

Front/Rear/Side Panel Controls

FRONT VIEW

REAR/SIDE VIEW

First time use

POWER

CH+

CH-

CURSOR VOL + VOL -

INPUT/EXIT

MENU/SELECT

PHOTO	INPUT
IEEE1394	DV INPUT
	S-VIDEO
INPUT 5	L/MONO AUDIO VIDEO
	R

SIDE POWER button

Press this button to turn the Plasma Television ON/OFF. It can also be turned ON/OFF by remote control. The “MAIN POWER” button must be at stand-by mode.

MENU/SELECT button

This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.

￿PHOTO INPUT

Insert USB cable from your Digital Camera, USB memory or memory card USB drive to view your digital still pictures (see pages 28-29).

INPUT/EXIT button

Press this button to access the INPUT menu. Press again to exit the MENU mode.

CHANNEL selector

Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down ( ) and up ( ) buttons when in MENU mode.

VOLUME level

Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as the cursor left ( ) and right ( ) buttons when in MENU mode.

Firmly bind the cables.
Thread the band through	Hook the band
the square hole.	to the claw.

NOTE: The Rear View of the 55” model is slightly different from the 42” models. One of the differences are the handles that are only present on the 42” models.

POWER button

Display Monitor “MAIN POWER” button

This power button is for the complete system, and must be turned ON/OFF manually. It is recommended to leave the “MAIN POWER” to ON condition (lights red) for stand-by mode.

The Main Power button is located on the broadside bottom, under the label “MAIN POWER”.

NOTE: When the “MAIN POWER” button is set to OFF or the TV is unplugged, the clock will stop and may eventually reset itself.

9