Hitachi 42PD5000 Installation Instructions, Anti-tumble measures, Securing to a wall or pillar

01 QR58553-英語-初校03.10.15 10:47 AM ページ10

INSTALLATION INSTRUCTIONS

Installation

•If you have purchased the model without the stand attached:

When installing the monitor, use the optional Desk-top Stand (CMPAD23/25). The Desk-top Stand has been used for the illustrations in this manual.

WARNING

Use one of the special mount units to install this product. A mount of insufficient strength or inadequate design can cause overturning or dropping and result in fire, electrical shock or injury. Please note that our company assumes absolutely no responsibility for personal injuries or property damage caused by use of other mount units or improper installation.

CAUTION

•Installation of the wall mount unit and ceiling mount unit can be dangerous, so do not attempt this work yourself. Ask your dealer to provide the name of a qualified installer.

•In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches : For a desktop set- up) or more between the sides and other objects such as walls, etc., so that the ventilation holes are not blocked.(✻)

10cm (4 inches) or more*

Clamp

Cord

or

chain

Anti-tumble measures

CAUTION

Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible physical injury.

Securing to a wall or pillar

Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar.

cord or chain for 32"

Hook
Chain	cord or chain for 42"
clamp for 32"
	Wall or Pillar
clamp for 42"

Securing desktop

1)Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown.

2)Using commercially available wood screws, secure the set firmly in position.

Wood screw

Two places

10