Hitachi 42PD5000 user manual Operating Instructions Picture Menu, Film Mode PAL Comb Filter, Red

01 QR58553-英語-初校03.10.15 10:47 AM ページ36

OPERATING INSTRUCTIONS (continued)

PICTURE MENU (continued)

Selected characters

Picture Mode

Contrast

Brightness

Color

Sharpness

Tint

Color Temperature

Contrast Mode

Reset

YNR

CNR

Film Mode

PAL Comb Filter

LTI

CTI

Black Enhancement

Auto Color

Color Temp. Adjustment

	Red
Amplitude	Green
	Blue
	Red
Cut Off	Green
	Blue

	▲				▲
		Dynamic		Natural
Narrows the gap between			Broadens the gap between
brightness and darkness.			brightness and darkness.
Black is subdued for			Black is set off for increased
increased overall darkness.			overall brightness.
Darkens colors.			Lightens colors.
Soft			Sharp
Enhances red and weakens			Enhances green and weakens
green.			red.

Cool Normal Warm Black / White

Normal Auto Dynamic

(off the function) (waiting to reset)

Off Low High

Off On

Off On

OffLowMiddleHigh

	Off		On
	Off		On
Brighter scene is decreased in		Brighter scene is increased in
reddish color.		reddish color.
Brighter scene is decreased in		Brighter scene is increased in
greenish color.		greenish color.
Brighter scene is decreased in		Brighter scene is increased in
bluish color.		bluish color.
Dark scene is decreased in		Dark scene is increased in
reddish color.		reddish color.
Dark scene is decreased in		Dark scene is increased in
greenish color.		greenish color.
Dark scene is decreased in		Dark scene is increased in
bluish color.		bluish color.

Setup hint

Dynamic: This setting is best for very bright ambient lighting.

Natural: This setting is for normal lighting conditions.

Adjust for maximum visibility to suit the ambient brightness.

This can adjust further till [+40] by pressing and holding cursor button at [+31]. The color for [+32] to [+40] numbers will change from white to magenta. This special mode is better for dark scenes.

For normal viewing we recommend that the Contrast is set to [+31]. "Panel Life" in the Function Menu should be set to Normal when this Contrast setting is adjusted.

Adjust to taste.

Adjust to taste.

Normally set to Centre position Shift to the minus (-) side for a softer effect and plus (+) for sharper picture.

This is not available to adjust when receiving PAL/SECAM signal. Then the character will be grayed out.

Adjust for most realistic skin color.

Normally set to Cool.

Dynamic:Emphasizes the differences between video shadings to improve the feeling of contrast.

Normal : The gradation of an image is reproduced as faithfully as possible.

Auto:Detects image brightness and automatically adjusts for natural brightness.

The original factory settings for the items of this Menu page can be restored by pressing the OK button.

Performs picture signal noise reduction. Turn up to reduce noise.

Performs color signal noise reduction. Turn up to reduce noise. And it will be fixed as Off only when selecting DVI-STB mode.

On:Automatically detects the movie film material and faithfully reproduces the original film image.

Off:Set to OFF when switching between images does not appear natural.

This is available only when receiving a PAL composite signal. Turn On to reduce the discolorations in fine picture detail and provides purer color.

Adjusts the sharpness of the picture signal.

Adjusts the sharpness of the color signal.

Adjusts the black level compensation.

This is available only when receiving an NTSC composite/S.Video signal. This monitors and adjusts the color to maintain constant color levels. It also maintains natural flesh tones while preserving fidelity of background colors.

Turn On when you wish to change color temperature depending on the user's preference.

Adjust color temperature depending on the user’s preference. These settings are independently stored in each of the 4 Color Temperature modes.

36