Hitachi 42PD5000 Operating Instructions, Using the Menu Screen On-screen display system

01 QR58553-英語-初校03.10.15 10:47 AM ページ16

OPERATING INSTRUCTIONS (continued)

AUTO button MENU button

	VOL
RGB 1 RGB 2	MUTE VOL

AV1 AV2 AV3 AV4

AUTO PinP SIZE RECALL

MENU

OK

Using the Menu Screen (On-screen display system)

When the MENU button is pressed, the adjustment menu screen will be displayed; from there, PC signal adjustment

RETURN buttons and setting is possible by using the SELECT button,

ADJUST button and OK button.

• Refer to 17 - 21 concerning the adjustment items and the

SELECT/ADJUST settings. buttons

ID	ID SET	OK button
ID button
		ID SET button

Automatic Adjustment of Screen Position and the Clock

Adjustment of the screen to a position suitable for the PC signal and the clock adjustment can be performed automatically by pressing the AUTO button of the remote control.

CAUTION

Perform this adjustment for each input (RGB1 or RGB2) and for each signal.

*Depending on the signal, satisfactory adjustment may not be possible in some cases. In such case, adjust by referring to the Setup Menu item.

Example: Selecting the Picture screen

1. Press the MENU button to display the Main Menu

screen.
	Picture
MENU	Audio
	Timer
	Function

Setup

Language

Select

OK Set

2.Press the OK button to display the Picture Menu screen. (Use the and SELECT buttons to select other items.)

	Picture
	Contrast		:	+ 31
OK	Brightness		:	– 31
	Color		:	0
	Tint		:	+ 31
	Picture Enhancement		:	Off
	Color Temperature		:	Normal
	Color Temp.Adjust
	Reset			Reset
	Select	Return		Exit

3.Use the and SELECT buttons to select the item to be adjusted and then use the and ADJUST buttons to adjust (example: Contrast).

Independent Operation of Multiple Monitors (ID No)

Setting the ID No. of the remote control allows separate control of up to a maximum of seven monitors. Remote control ID No. 2 (initially ID no. 1) can be set by pressing the ID SET button for 2 sec. or more while holding down the ID button. The number will be incremented (2…6→7→1→2) when this button pressed continuously.

Contrast		+ 31
Next / Prev	Adjust	Return

• Press the RETURN button to return to the previous screen.

• If there is no operation for a period of one minute, the

ID Number
Monitor	[ 1 ]
R/C	[ 1 ]

The remote control ID no. can be checked by pressing the ID SET button while holding down the ID button.

Monitor ID no.

Adjustment Menu screen will be closed automatically.

Remote control ID no.

The ID remote control is operated by pressing the various buttons while holding down the ID button; Operation is possible only when the remote control and monitor ID nos. are the same.

•The remote control can be operated normally by pressing the various remote control buttons without holding down the ID button.

•Set the monitor using the ID No. of Function MENU. 19

16