Hitachi 42PD5000 Product Specifications, Signal Input, RGB terminal D-sub 15-pin connector

01 QR58553-英語-初校03.10.15 10:47 AM ページ27

PRODUCT SPECIFICATIONS

Product specifications and designs are subject to change without notice.

		Display	Approx. 32 inches (716 (H) x 399 (V) mm, diagonal 820mm)	Approx. 42 inches (922 (H) x 522 (V) mm, diagonal 1059mm)
Panel		dimensions
		Resolution	852 (H) x 1024 (V) pixels	1024 (H) x 1024 (V) pixels
Net dimensions			830 (W) x 506 (H) x 92 (D) mm	1030 (W) x 636 (H) x 91 (D) mm
(excluding Speakers/Stand)
Net weight			24.6kg	34.9kg
(excluding Speakers/Stand)
Ambient		Temperature	Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C
conditions		Relative humidity	Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Power supply			AC100 - 240V, 50/60Hz
Power consumption/at standby			255W / <3W	365W / <3W
Audio output			12W + 12W (6Ω)
(RGB input)
			RGB1 DVI input terminal (DVI-D)
		Input terminals	RGB1 audio input terminal (3.5mm Stereo Mini Jack)
			RGB2 analog RGB input terminal (D-sub 15-pin)
			RGB2 audio input terminal (3.5mm Stereo Mini Jack)
Input signals
	Video signals		0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
			H/V separate, TTL level [2KΩ]
		Sync signals	H/V composite, TTL level [2KΩ]
			Sync on green, 0.3 Vp-p [75Ω]
Recommended signal			43 modes 28 29

• The monitor takes at least 30 minutes to attain the status of optimal picture quality.

ENGLISH

Signal Input

RGB terminal (D-sub 15-pin connector)

Pin	Input signal
1	R
2	G or sync on green
3	B
4	No connection
5	No connection
6	R.GND
7	G.GND
8	B.GND
9	No connection
10	GND
11	No connection
12	[SDA]
13	H. sync or H/V composite sync
14	V.sync. [V.CLK]
15	[SCL]

5 4 3 2 1

10 9 8 7 6

15 14 13 12 11

•When different kinds of input signals are simultaneously input to the monitor via a graphics board or the like, the monitor will automatically select the signals in the following priority order:

Sync signal type	Priority
H/V separate sync.	1
H/V composite sync.	2
sync.on Green *	3

*Even in the case of the recommended signals shown on the following page, there may be instances when correct display is not possible. In this case, use H/V separate sync, H/V composite sync.

27