Hitachi 42PD5000 Operating Instructions Setup Menu, During Video signal input, Auto Off

01 QR58553-英語-初校03.10.15 10:47 AM ページ52

OPERATING INSTRUCTIONS (continued)

SETUP MENU (continued)

Selected characters

Auto Tuning

Mode

Search

Manual Tuning

Position

Frequency

Name

Sound System

Color System

Skip

NR

Fine Tuning

Sort

(A Line of position List)

Auto Off

▲			▲	Setup hint
				Select the channel entry method between position setting or direct
				setting. And press the OK button to fix it.
	Position	Direct		• If [Position] is selected, the screen display will be numbers (1~199
				and AV00).

•If [Direct] is selected, the screen display will be C✱✱ at the channel 0~99 and S✱✱ at the channel 100~199.

–		–	Press the OK button and it starts the auto tuning.
–		–	Set the position number(0~199) or channel number(C✱✱, S✱✱) by ▼
			▲ PROGRAM UP/DOWN buttons.
			• If [Position] has been selected, search the frequency here by
–		–	pressing ▲ ▲ buttons.
			• If [Direct] has been selected, this function will be not available
			(grayed out).
			This is used to input the name of the TV station within 5 letters. After
			fixing the cursor on the first digit, select a letter by ▼ ▲ SELECT
			buttons and move to next digit by ▲ ADJUST button. Press the OK
	( :a letter)		button again after finished.
			• Selectable letters are “0”~`”9”, ”A”~`”Z”, “+”, “–”, ” ”(blank),
			”,”(comma) and ”.”(period) .

			Auto		M					BG	Select the sound system through the 5 different settings.
				DK					I
	Auto			PAL					SECAM		Select the color system through the 5 different settings.
		NTSC3.58					NTSC4.43
											If this is set to On, that position will be skipped while selecting
				Off				On
											positions by PROGRAM UP/DOWN buttons.
											This is automatically set to On for those non-broadcasting channels.
				Off				On			If this is set to On, it helps to reduce the noise interference visible on
											the screen, especially in the weaker signal reception areas.
Decreasing the frequency						Increasing the frequency					After completing the fine-tuning, press the RETURN button to exit this
data for the main tuner						data for the main tuner.					mode.
											• The variable range is -56 ~ +56.

(When the Mode in Auto Tuning menu is set to [Direct], this function will be not available (grayed out).)

				Press OK button at the a line that is required to change order, then
–			–	the characters will change to green. And move it up or down in the list
				by pressing ▼ ▲ SELECT buttons. And press OK button to complete
				it. Press the RETURN button to exit.
	Off	On		If this is set to On, the power will be turned off when there is no
				transmission signal and no operation for about 10 minutes in the TV
				mode.

[During VIDEO signal input]

1 item is added to the Menu shown in the page				39 .
	Selected characters	▼				▼
	Scart Output		TV		Monitor

Setup hint

TV:AV4 (Scart) output will be fixed as TV signal output. Monitor:AV4 (Scart) output can view the image as on the main unit. But it is possible to monitor only the composite video signal from AV1, AV2, or AV3 input that is displayed on the screen at the time.

52