Hitachi L46S603 important safety instructions Side Panel Jacks & Controls, AV2 Side Jacks

Side Panel Jacks & Controls

USB/

RGB

RGB

Indicating Lamp

Please refer to page
37 for Picture Energy	POWER
Saving.

POWER button

This power button is for turning ON the LCD TV, in order to turn the TV On , the standby indicator must be lit red. If the indicator is off, plug the power cord into the power outlet.

MENU button

This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the Return button when in the MENU system.

INPUT button

Press this button to access the INPUT menu.

VOLUME (+/-) level

Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as the cursor left (◄) and right (►) buttons when in the Menu system.

CHANNEL selector

Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down () and up ( ) buttons when in the MENU system.

AV2 (SIDE) JACKS

AV2 input provide composite Video and S-Video jacks for connecting equipment with this capability, such as a DVD player, Game Console or Camcorders.

HDMI-4 & HDMI-5

Use these side HDMI inputs for AV equipment such as Set-Top-Boxes or DVD players equipped with an HDMI output connection (see page 14 for reference).

RGB and AUDIO for Personal Computers (PC)

Use the RGB/Analog Audio Input terminal for connecting a PC or Laptop using a RGB cable (D-sub 15 pin) to your LCD TV. Please see page 55 for compatible resolutions.

FRONT VIEW

2 R/C Sensor and

Ambient Light Sensor

USB Multimedia / UPGRADE SLOT

This USB slot is for use with the multimedia feature and future software upgrades.

Headphone jack

Use this jack to connect headphones.

POWER light indicator

To turn the TV ON, press the Power button ( ). A red stand-by indicator lamp located on the lower right corner of the front bezel has to be illuminated in order to turn ON the LCD TV.

Indicating	Power	Operating
Lamp	Status
Lights	OFF	When the LCD TV is plugged
Red	(Stand-by)	to the AC line.
Lights	ON	TV Power is ON; picture is
Blue		shown.
Quickly	ON	The TV is powering OFF.
Blinking Red		It will soon be in the Off (Stand-
		by) state.
Slowly Blinks	ON	TV is in the RGB input and has
Red	(Stand-by)	been without an input signal for
		15 mins. TV will resume after
		the input signal is detected.

2 REMOTE CONTROL and AMBIENT LIGHT sensor

Point your remote at this area when selecting channels, adjusting volume, etc. This area also detects ambient light level for automatic brightness control of the screen.

NOTES	• Your HITACHI LCD TV will not show any picture if
	there is no video input whenAV1,AV2, Component1
	or 2, or HDMI 1, 2, 3, 4 or 5 is selected. Instead a
	message will indicate “No Signal” and the Power
	Light will remain Blue until the TV is turned off or in
	Stand-by mode (lights red) when not in use.

•The Remote Control can turn the TV ON/OFF as well as control various devices and any compatible HDMI CEC devices.

•Please do not put anything around the R/C and Ambient light sensor, as its function will be affected.

FIRST TIME USE

9