Accessories

Hitachi L46S603 Accessories, Remote Control Battery Installation and Replacement

Check to make sure you have the following accessories before disposing of the packing material.

Remote Control Unit	“AAA” Size	Power Cord	Operating Guide
CLU-4997S	Batteries (2)
(Part No. HL02567)
			NEED MORE INFO ON THE DTV TRANSITION?
			See page 41 in this Operating Guide and
			please visit www.dtvtransition.org

UltraVision® LCD Flat Panel HDTV

Operating Guide for L46S603 & L55S603

IMPORTANT SAFETY INSTRUCTIONS	2-5
FIRST TIME USE	6-17
THE REMOTE CONTROL	18-27
ON-SCREEN DISPLAY	28-41
USEFUL INFORMATION	42-48
LIMITED WARRANTY	49
END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE	50-54
APPENDIXES	55
INDEX	56

READ THE ENCLOSED INSTRUCTIONS CAREFULLY. KEEP THIS OPERATING GUIDE FOR FUTURE REFERENCE.

Record the model name and serial number of your LCD Television for future reference.

MODEL NAME. ____________________ SERIAL NO. ________________________

This information is located on the back and right side of the television.

Easy Graphic Guide

y Stand Screw (4) (M6x10)

	For optional accessories, please access our web site at: www.hitachi.us/tv
CAUTION	• Ceiling mounting is not recommended. Mounting the panel on the ceiling does not provide adequate
	ventilation for the electronics or proper support for the front panel. This LCD television product is designed
	for a maximum tilting angle of 45 degrees from vertical.

•Please see page 8 for important information related to wall mounting.

REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT

The remote control operates on 2 “AAA” batteries.

1. Open the battery cover of the remote control by pushing and pulling it in the direction of the arrow.

2. Insert two new “AAA” size batteries for the Remote Control. When replacing old batteries, push them towards the springs and lift them out.

3.Match the batteries to the (+) and (-) marks in the battery compartment.

4. Insert the bottom of the battery, the (-) side, into the battery compartment ﬁrst, push towards the springs and insert the top of the battery, the (+) side, into place. Do not force the battery into the battery compartment.

5. Close the battery cover making sure the tabs rest in the corresponding holes and push down the cover until it clicks shut.

CAUTION	• Do not insert batteries with ‘+’ and ‘-’ polarities reversed as this may cause the batteries to swell or rupture
	resulting in leakage.

•Never mix used and new batteries in the device.

•Replace all the batteries in the device at the same time.

•Remove the batteries if the remote control is not going to be used for an extended period of time.