CTs
8 AC Power Draw and
Thermal Dissipation
AC Power Draw and Thermal Dissipation:
Pink noise 12dB crest factor, bandwidth limited 22Hz to 22kHz.
Typical line impedance used.
Measurements made with 120VAC mains. Line current figures for 230VAC units derived by multiplying 120VAC figures by 0.5.
Data based on all channels driven.
CTs 4200
| Load | Rated | Line Current | Line Current |
| Watts |
| Thermal Dissipation | ||
| Power | 120VAC | 230VAC |
|
|
| ||||
|
| watts in | watts out | dissapated | Btu/hr | kcal/hr | ||||
|
|
|
|
| ||||||
At Idle (8.4 Ohm mode ) |
|
|
|
| 70 | 0 | 70 | 239 | 60 | |
At Idle (70/100V mode) |
|
|
|
| 114 | 0 | 114 | 389 | 98 | |
|
|
|
|
|
|
|
|
|
| |
1/8th Power Pink Noise | 8 Ohms/Ch. | 200x4 | 5.2 | 2.6 | 400 | 99 | 301 | 1027 | 259 | |
Typical of program material | 16 Ohms Bridge | 400x2 | ||||||||
|
|
|
|
|
|
| ||||
just at clip. | 4 Ohms/Ch. | 260x4 | 7.8 | 3.9 | 639 | 134 | 505 | 1722 | 434 | |
| 8 Ohms Bridge | 520x2 | ||||||||
|
|
|
|
|
|
|
| |||
| 70V/Ch. | 220x4 | 5.3 | 2.7 | 427 | 110 | 318 | 1084 | 273 | |
| 100V Bridge | 220x2 | ||||||||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| |
1/3rd Power Pink Noise | 8 Ohms/Ch. | 200x4 | 7.6 | 3.8 | 648 | 257 | 391 | 1336 | 337 | |
Typical of program material | 16 Ohms Bridge | 400x2 | ||||||||
|
|
|
|
|
|
| ||||
with severe clipping. | 4 Ohms/Ch. | 260x4 | 11.8 | 5.9 | 1005 | 349 | 655 | 2236 | 564 | |
| 8 Ohms Bridge | 520x2 | ||||||||
|
|
|
|
|
|
|
| |||
| 70V/Ch. | 220x4 | 7.9 | 4.0 | 668 | 286 | 382 | 1303 | 329 | |
| 100V Bridge | 220x2 | ||||||||
|
|
|
|
|
|
|
| |||
Operation Manual | page 23 |