Magnavox CD130MW9 5Random Playback, 5Programmed Playback, Press Play B to start random playback

Note:

•Repeat setting (except “ALL“) will be cleared when moving to another title, chapter or track.

•During programmed playback for audio CD, repeat setting will be effective for the tracks in the program.

•Repeat playback or repeat A-B playback may not available with some discs.

•Repeat A-B playback does not function during other repeat mode.

•To cancel point A, press [CLEAR] at step 2 in “Repeat A-B Playback“.

•Stopping playback will cancel repeat A-B playback.

5Random Playback

CD

This function shuffles the playing order of tracks instead of playback in the sequence.

1In stop mode, press [MODE] repeatedly until “RANDOM” menu appears.

RANDOM

CD-DA TOTAL 0:45:55

RANDOM PROGRAM

--no indication--

PLAY

2Press [PLAY B] to start random playback.

Note:

•To repeat the current track in the random mode, follow the

steps 1 and 2 in “Repeat Playback“ on page 26 and select “TRACK“.

•To repeat the entire random selections, follow the steps 1 and 2 in “Repeat Playback“ on page 26 and select “ ALL“.

•Random playback will be kept until you press [STOP C].

5Programmed Playback

CD

You may determine the order in which tracks will be played back.

1In stop mode, press [MODE] repeatedly until the “PROGRAM” menu appears.

PROGRAM
	CD-DA				TOTAL	0:00:00
	T	1	3:31
	T	2	4:28
	T	3	4:19
	T	4	3:58
	T	5	4:12
	T	6	4:02
ENTER	T	7	3:55		1/	1
PLAY			1/	3
CLEAR	T 1 3:31

	INTRODUCTION
2 Use [Cursor K / L] to select a desired track, then press
[ENTER] to store.
• Additional tracks may be on other screens. Use	CONNECTION
you wish to play back in the program.
[Cursor K/ L] to go on to the next / previous pages.
• Repeat this step until you have selected all the tracks

or	PROGRAM
	CD-DA		TOTAL	0:08:22	INITIAL
	T 15 3:18		T 4	3:58
	T 16 4:24		T 16	4:24
	ALL CLEAR				SETTING
	ENTER		1/	1
	3/	3
	PLAY
	CLEAR T 16 4:24
• Up to 99 tracks can be ordered.
• If 8 or more tracks were in a program, use					WATCHINGTV
3 Press [PLAY B] to start programmed playback.
[PREV H / NEXT G] to see all the tracks.

			OPTIONAL
Note:
• Press [CLEAR] to erase the last track in the program if you			SETTING
make an error.
• To erase all programmed tracks at once, select “ALL CLEAR’’
and press [ENTER] at step 2.
• While a program is being played back, [STOP C] works as			OPERATING
follows:
- Pressing [STOP C] once: The track will be in the resume
standby mode. Next time you press [PLAY B], the playback
will resume from the point where it is stopped in the			DVD
programmed playback.
- Pressing [STOP C] twice: Resume mode will be canceled.
Next time you press [PLAY B], playback will restart from the
first track in the original order. However, your programmed			DVD
playback can be restarted when you follow the above steps.
(Your programs are still stored until either the disc is ejected			SETTING
or the unit is turned off.)
- On some discs, [STOP C] will not work while the resume
message appears. Please wait until the message disappears.
• To repeat the current track in the program, follow the steps 1
and 2 in “Repeat Playback“ on page 26 and select			TROUBLESHOOTING
“	TRACK“.
• To repeat the entire program, follow the steps 1 and 2 in
“Repeat Playback“ on page 26 and select “		ALL“.
• Turning off the unit or opening the disc tray will erase the
program.
• You cannot use [the Number buttons] to select another
track during programmed playback. Use [REW h] or
[FWD g] to select other tracks in the program.			INFORMATION
• You cannot combine random playback with programmed
playback.
• You cannot alter a programmed order during playback.
• You can start programmed playback only while in
“PROGRAM“ menu.
			ESPAÑOL

27

EN