Operating
Using the automatic adjustment feature
1. Press the AUTO button on the remote control.
VIDEO RGB SEARCH
For an RGB signal
ASPECT | AUTO BLANK |
The vertical position, the horizontal position, the clock phase
and the horizontal size will be automatically adjusted. MAGNIFY ON 
VOLUME And the aspect ratio will be automatically selected. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.
For a video signal or s-video signal
The video format best suited for the respective input signal and the aspect ratio will be selected automatically.
This function is available only when the AUTO mode is selected to the VIDEO FORMAT item in the INPUT menu ( 30) . For a component video signal, the signal type is identifi ed automatically independently of this function.
For a video signal,
The vertical position and horizontal position will be automatically adjusted.
For a component video signal
The aspect ratio will be automatically selected.
The clock phase will be automatically adjusted.
●The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input.
Adjusting the position
1. Press the POSITION button on the remote control. The “POSITION” indication will appear on the screen.
FREEZEKEYSTONE
2. Use the cursor buttons ▲/▼/◄/► to adjust the picture position.
POSITIONMENU
ENTER
When you want to reset the operation, press the RESET button on the remote control during the operation.
To complete this operation, press the POSITION button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
●When this function is performed at a video signal, a certain extra such as a line may appear outside a picture.
19