Hitachi CP-X440 Specification, RGB input, RGB output, Audio input, Audio output, Video input

Page 48

Warranty And After-Service

Warranty and after-service

If a problem occurs with the equipment, fi rst refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.

Specifications

Specifi cations

NOTE • These specifi cations are subject to change without notice.

 

Item

Product name

Liquid

Panel size

 

Crystal

Drive system

panel

 

Pixels

Lens

Lamp

Speaker

Power Supply

Power Consumption

Temperature range

Size

Specification

Liquid crystal projector

CP-X444 : 2.0 cm (0.79 type)

CP-X440 : 1.8 cm (0.7 type)

TFT active matrix

786,432 pixels (1024 horizontal x 768 vertical)

CP-X444 : Zoom lens F=1.7 ~ 2.1 f=24.4 ~ 29.3 mm

CP-X440 : Zoom lens F=1.7 ~ 1.9 f=21.8 ~ 26.2 mm 230W UHB

1W x 1

AC100-120V/4.0A, AC220-240V/2.0A

370W

5 ~ 35°C (Operating)

336 (W) x 95 (H) x 265 (D) mm (Not including protruding parts)

• Please refer to the following fi gure.

Weight (mass)

Ports

Optional

Lamp

Air fi lter

parts

Others

 

CP-X444 : 3.7 kg

CP-X440 : 3.5 kg

RGB input:

RGB IN1 ..D-sub 15pin mini x1 RGB IN2 ..D-sub 15pin mini x1

RGB output:

RGB OUT D-sub 15pin mini x1

Audio input:

 

AUDIO 1

Stereo mini x1

AUDIO 2

RCA x2

Audio output:

AUDIO OUT ... Stereo mini x1

DT00691

NJ20642

• Please consult your dealer.

Video input:

 

 

COMPONENT VIDEO

 

(Y, CB/PB, CR/PR)

RCA x3

S-Video

1

Video

1

Communication port:

 

CONTROL

D-sub 9pin x1

48

Image 48
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Setting up Remote controlPower on/off MaintenanceAbout contents of package Fastening the lens cover Projector ComponentCB/PB CR/PRRemote control Control buttonsMagnify Setting up Arrangement For the model CP-X444For the model CP-X440 Adjusting the projectors elevator About the filter cover for bottom-up use Connecting your devices About Plug-and-Play capabilityConnecting to a monitor output Connecting to a speaker with amplifier outputExamples of connection with a computer Examples of connection with a VCR/DVD player Audio/Video cableVideo out Audio L out Audio R outConnecting power supply Remote control Putting batteriesUsing the remote control Power on/off Turning on the powerTurning off the power PowerAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Adjusting the zoom and focus For an RGB signal  For a video signal/no signalUsing the automatic adjustment feature Adjusting the position For a video signal or s-video signal  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenMultifunctional settings Using the menu functionAdvanced Menu Aspect Mode Brightness Contrast Color Tint Shrpness Whisper Easy MenuDescription Mirror Reset Filter Time Language Easy MenuGo To Advanced Menu Description #3 Custom  #3 Default  #2 Custom Picture MenuGamma Picture Menu Color TempHigh  Middle  LOW  Custom Color Tint SharpnessProgressive MY Memory TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 Aspect Over Scan Position H Position Phase For an RGB signalFor a video signal / no signal 43  169  Small Image MenuSize Auto Adjust Execute For a video signal or s-video signalImage Menu Input Menu Color Space Component Video FormatComponent  Scart RGB Auto  Ntsc  PAL  SecamInput Menu InformationSetup Menu Whisper Mirror VolumeAudio Screen Menu Menu Position OSD Bright BlankBright  Dark Screen Menu Start UPMyScreen MyScreen Lock Description Turn on  Turn OFFMessage No Input is Detected Sync is OUT of RangeReset  Cancel Option MenuAuto Search Auto OFF Lamp Time Filter Time RGB IN1  RGB IN2  Component Video  S-VIDEO  VideoOption Menu Maintenance LampCase of replacement by yourself LampAir filter Caring for the cabinet and remote control Other careInside of the projector Caring for the lensTime the lamp timer has counted is approaching 2000 hours There is no input signalRelated messages Internal temperature is rising Related messagesRegarding the indicator lamps Lamp does not light, and there is aPossibility that interior portion has become HeatedRegarding the indicator lamps It is time to clean the ai r filterCooling fan is not operating There is a possibility that the interior portionElectrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Volume is adjusted to an extremely low levelBrightness is adjusted to an extremely low level Color settings are not correctly adjustedColor Space setting is not suitable Lens cap is attachedSpecification RGB inputRGB output Audio inputFor the model CP-X444 For the model CP-X440 SpecificationsExample of computer signal Vesa TextVesa Initial set signals Connection to the ports RGB in 1, B RGB in 2, C RGB OUTComponent Video D Y, E CB/PB F CR/PR Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jack RTSCTS Connecting the cable Communications settingRS-232C Communication Requesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandRS-232C Communication Be EF FB FA Color Temp Gain G Aspect Keystone Mute OSD Bright Hitachi Atago Building
Related manuals
Manual 2 pages 63.85 Kb Manual 2 pages 62.14 Kb

CP-X444, CP-X440 specifications

The Hitachi CP-X440, CP-X444, and CP-X445 projectors are part of Hitachi's highly regarded line of portable projectors designed for professional presentations, educational environments, and corporate meetings. With their robust performance and user-friendly features, these projectors stand out as reliable tools for a variety of applications.

One of the key features of the CP-X440, CP-X444, and CP-X445 is their impressive brightness levels. Equipped with high-lumen output capabilities, these projectors ensure vibrant and clear images even in well-lit environments. With brightness ratings of up to 4000 ANSI lumens, they can effectively project content onto large screens or walls, making them suitable for classrooms, conference rooms, and auditoriums.

Resolution is another critical aspect of these projectors. The CP-X440, CP-X444, and CP-X445 support native XGA resolution (1024 x 768 pixels), providing sharp and detailed images that enhance the viewing experience. This resolution is ideal for displaying presentations, charts, and videos, ensuring that the audience can easily read and understand the content.

In terms of connectivity, these projectors offer a wide range of options to accommodate various devices. They come with multiple input terminals, including HDMI, VGA, and composite video connections, making it easy to connect laptops, DVD players, and other multimedia devices. Additionally, the CP-X445 model features an integrated wireless option, enabling seamless presentation sharing from mobile devices and laptops without the need for cables.

The use of advanced technology is evident in the image quality produced by these projectors. Hitachi's proprietary technology enhances color reproduction and contrast, delivering images that are not only bright but also rich in detail. The projectors also utilize a maintenance-free filter, significantly reducing the need for regular upkeep and prolonging the lifespan of the device.

Portability is an essential characteristic of the CP-X440, CP-X444, and CP-X445 projectors. Their compact design and lightweight construction make them easy to transport, allowing professionals to take them between different venues effortlessly. The projectors also come equipped with a quick-start feature, enabling users to set up and start presentations in no time.

To further enhance usability, these projectors include built-in speakers, providing sufficient audio output for small to medium-sized rooms. The user-friendly interface and remote control make navigation and operation straightforward for users of all skill levels.

In summary, the Hitachi CP-X440, CP-X444, and CP-X445 projectors offer a blend of brightness, resolution, connectivity, and portability, making them ideal choices for various presentation needs. Their advanced features and ease of use ensure that they meet the demands of professionals seeking reliable and effective projection solutions.