Hitachi CP-X440, CP-X444 user manual Setting up

Page 6

Setting up

Setting up

WARNING ►Place the projector in a stable position horizontally. A fall or a turnover could cause an injury and/or damage to the projector. Then using damaged projector could result in a fi re and/or an electric shock.

•Do not place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined stand.

•Do not place the projector in the side/front/rear-up position, except cleaning the air fi lter.

•For the projector installed bottom-up, use the accessory fi lter cover for bottom- up use. And in the case of a ceiling installation or the like, contact your dealer before installation.

►Place the projection in a cool place, and pay attention enough to ventilation. The high temperature of the projector could cause a fi re, a burn and/or malfunction to the projector.

•Do not stop up, block and cover the projector's vents.

•Keep a space of 30 cm or more between the sides and other objects such as walls.

•Do not place the projector on a metallic thing or anything weak in heat.

•Do not place the projector on a carpet, cushion or bedding.

•Do not place the projector in direct sunlight or near a hot object such as a heater.

•Put nothing about lens and vents of the projector. Put nothing on the projector.

•Put nothing that is sucked or sticks to the bottom of projector. This projector has some intake vents also on the bottom.

►Do not place the projector on the place that gets wet. Damping the projector or inserting liquid in the projector could cause a fi re, an electric shock and/or malfunction to the projector.

•Do not place the projector in a bathroom or the outdoors.

•Put nothing containing the liquid near the projector.

CAUTION ►Avoid a smoky, humid or dusty place. Placing the projector in such place could cause a fi re, an electric shock and/or malfunction to the projector.

•Do not place the projector near a humidifi er, a smoking space or a kitchen. ►Adjust the direction of the projector to keep the light from directly hitting the projector's remote sensor.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Power on/off Setting upRemote control MaintenanceAbout contents of package Fastening the lens cover CB/PB ProjectorComponent CR/PRRemote control Control buttonsMagnify Setting up Arrangement For the model CP-X444For the model CP-X440 Adjusting the projectors elevator About the filter cover for bottom-up use Connecting your devices About Plug-and-Play capabilityConnecting to a monitor output Connecting to a speaker with amplifier outputExamples of connection with a computer Video out Audio L out Examples of connection with a VCR/DVD playerAudio/Video cable Audio R outConnecting power supply Remote control Putting batteriesUsing the remote control Turning off the power Power on/offTurning on the power PowerOperating Adjusting the volumeSelecting an input signal Temporarily muting the sound For an RGB signal Searching an input signalAdjusting the zoom and focus  For a video signal/no signal For a video signal or s-video signal Using the automatic adjustment featureAdjusting the position  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenMultifunctional settings Using the menu functionAdvanced Menu Aspect Mode Brightness Contrast Color Tint Shrpness Whisper Easy MenuDescription Mirror Reset Filter Time Language Easy MenuGo To Advanced Menu Description #3 Custom  #3 Default  #2 Custom Picture MenuGamma High  Middle  LOW  Custom Picture MenuColor Temp Color Tint SharpnessProgressive MY Memory TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 For a video signal / no signal 43  169  Small Aspect Over Scan Position H Position PhaseFor an RGB signal Image MenuSize Auto Adjust Execute For a video signal or s-video signalImage Menu Component  Scart RGB Input MenuColor Space Component Video Format Auto  Ntsc  PAL  SecamInput Menu InformationSetup Menu Whisper Mirror VolumeAudio Screen Menu Menu Position OSD Bright BlankBright  Dark MyScreen MyScreen Lock Description Screen MenuStart UP Turn on  Turn OFFMessage No Input is Detected Sync is OUT of RangeAuto Search Auto OFF Lamp Time Filter Time Reset  CancelOption Menu RGB IN1  RGB IN2  Component Video  S-VIDEO  VideoOption Menu Maintenance LampCase of replacement by yourself LampAir filter Inside of the projector Caring for the cabinet and remote controlOther care Caring for the lensTime the lamp timer has counted is approaching 2000 hours There is no input signalRelated messages Internal temperature is rising Related messagesPossibility that interior portion has become Regarding the indicator lampsLamp does not light, and there is a HeatedCooling fan is not operating Regarding the indicator lampsIt is time to clean the ai r filter There is a possibility that the interior portionSignal cables are not correctly connected Electrical power cord is not pluggedPower switch is not set to the on position Volume is adjusted to an extremely low levelColor Space setting is not suitable Brightness is adjusted to an extremely low levelColor settings are not correctly adjusted Lens cap is attachedRGB output SpecificationRGB input Audio inputFor the model CP-X444 For the model CP-X440 SpecificationsExample of computer signal Vesa TextVesa Initial set signals Connection to the ports RGB in 1, B RGB in 2, C RGB OUTComponent Video D Y, E CB/PB F CR/PR Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jack RTSCTS Connecting the cable Communications settingRS-232C Communication Using the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandRS-232C Communication Be EF FB FA Color Temp Gain G Aspect Keystone Mute OSD Bright Hitachi Atago Building
Related manuals
Manual 2 pages 63.85 Kb Manual 2 pages 62.14 Kb

CP-X444, CP-X440 specifications

The Hitachi CP-X440, CP-X444, and CP-X445 projectors are part of Hitachi's highly regarded line of portable projectors designed for professional presentations, educational environments, and corporate meetings. With their robust performance and user-friendly features, these projectors stand out as reliable tools for a variety of applications.

One of the key features of the CP-X440, CP-X444, and CP-X445 is their impressive brightness levels. Equipped with high-lumen output capabilities, these projectors ensure vibrant and clear images even in well-lit environments. With brightness ratings of up to 4000 ANSI lumens, they can effectively project content onto large screens or walls, making them suitable for classrooms, conference rooms, and auditoriums.

Resolution is another critical aspect of these projectors. The CP-X440, CP-X444, and CP-X445 support native XGA resolution (1024 x 768 pixels), providing sharp and detailed images that enhance the viewing experience. This resolution is ideal for displaying presentations, charts, and videos, ensuring that the audience can easily read and understand the content.

In terms of connectivity, these projectors offer a wide range of options to accommodate various devices. They come with multiple input terminals, including HDMI, VGA, and composite video connections, making it easy to connect laptops, DVD players, and other multimedia devices. Additionally, the CP-X445 model features an integrated wireless option, enabling seamless presentation sharing from mobile devices and laptops without the need for cables.

The use of advanced technology is evident in the image quality produced by these projectors. Hitachi's proprietary technology enhances color reproduction and contrast, delivering images that are not only bright but also rich in detail. The projectors also utilize a maintenance-free filter, significantly reducing the need for regular upkeep and prolonging the lifespan of the device.

Portability is an essential characteristic of the CP-X440, CP-X444, and CP-X445 projectors. Their compact design and lightweight construction make them easy to transport, allowing professionals to take them between different venues effortlessly. The projectors also come equipped with a quick-start feature, enabling users to set up and start presentations in no time.

To further enhance usability, these projectors include built-in speakers, providing sufficient audio output for small to medium-sized rooms. The user-friendly interface and remote control make navigation and operation straightforward for users of all skill levels.

In summary, the Hitachi CP-X440, CP-X444, and CP-X445 projectors offer a blend of brightness, resolution, connectivity, and portability, making them ideal choices for various presentation needs. Their advanced features and ease of use ensure that they meet the demands of professionals seeking reliable and effective projection solutions.
Top Page Image Contents