Hitachi CP-X444, CP-X440 user manual Lamp, Case of replacement by yourself

Page 39
Lamp cover

Maintenance

Lamp (continued)

When the indicators or a message prompt you to replace the lamp, replace the lamp as soon as possible.

1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes.

2. To prepare a new lamp, contact your dealer and tell the lamp type number = DT00691 If the projector is mounted on the ceiling, or if the lamp has

broken, also ask the dealer to replace the lamp

In the case of replacement by yourself,

3. After making sure that the projector has cooled adequately, slowly turn over the projector, so that the bottom is facing up.

4. Please unhook the claws of the lamp cover and remove the lamp cover.

5. Loosen the 2 screws (marked by arrow) of the lamp, and slowly pick up the lamp by the

handles.

6. Insert the new lamp, and retighten fi rmly the two screws that are loosened in the previous

process to lock it in place.

7. While interlocking the 2 tabs of the lamp cover to the projector, position the lamp cover

on the projector. Then push the center point of the two claws to fi x the lamp cover.

8. Slowly turn the projector so that the top is facing up.

9. Turn the projector on, and reset the lamp time using the LAMP TIME function in the

OPTION menu ( 36)

Claws

Screws marked

by arrow

Tabs

Center point of claws

Claws

NOTE • When the lamp has been replaced after the message of "THE POWER WILL TURN OFF AFTER 0hr." is displayed, complete the following operation within 10 minutes of switching power on.

Incorrectly resetting of the lamp timer (resetting without replacement, or neglect of resetting after replacement) will result in incorrect message functions.

39

Image 39
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Maintenance Setting upRemote control Power on/offAbout contents of package Fastening the lens cover CR/PR ProjectorComponent CB/PBRemote control Control buttonsMagnify Setting up Arrangement For the model CP-X444For the model CP-X440 Adjusting the projectors elevator About the filter cover for bottom-up use About Plug-and-Play capability Connecting your devicesConnecting to a monitor output Connecting to a speaker with amplifier outputExamples of connection with a computer Audio R out Examples of connection with a VCR/DVD playerAudio/Video cable Video out Audio L outConnecting power supply Putting batteries Remote controlUsing the remote control Power Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal Operating For a video signal/no signal Searching an input signalAdjusting the zoom and focus  For an RGB signal For a component video signal Using the automatic adjustment featureAdjusting the position  For a video signal or s-video signalCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenMultifunctional settings Using the menu functionAdvanced Menu Aspect Mode Brightness Contrast Color Tint Shrpness Whisper Easy MenuDescription Mirror Reset Filter Time Language Easy MenuGo To Advanced Menu Description #3 Custom  #3 Default  #2 Custom Picture MenuGamma Color Tint Sharpness Picture MenuColor Temp High  Middle  LOW  CustomProgressive MY Memory TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 Image Menu Aspect Over Scan Position H Position PhaseFor an RGB signal For a video signal / no signal 43  169  SmallSize Auto Adjust Execute For a video signal or s-video signalImage Menu Auto  Ntsc  PAL  Secam Input MenuColor Space Component Video Format Component  Scart RGBInformation Input MenuSetup Menu Whisper Mirror VolumeAudio Screen Menu Menu Position OSD Bright BlankBright  Dark Turn on  Turn OFF Screen MenuStart UP MyScreen MyScreen Lock DescriptionNo Input is Detected Sync is OUT of Range MessageRGB IN1  RGB IN2  Component Video  S-VIDEO  Video Reset  CancelOption Menu Auto Search Auto OFF Lamp Time Filter TimeOption Menu Lamp MaintenanceLamp Case of replacement by yourselfAir filter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorTime the lamp timer has counted is approaching 2000 hours There is no input signalRelated messages Related messages Internal temperature is risingHeated Regarding the indicator lampsLamp does not light, and there is a Possibility that interior portion has becomeThere is a possibility that the interior portion Regarding the indicator lampsIt is time to clean the ai r filter Cooling fan is not operatingVolume is adjusted to an extremely low level Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connectedLens cap is attached Brightness is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableAudio input SpecificationRGB input RGB outputSpecifications For the model CP-X444 For the model CP-X440Example of computer signal Vesa TextVesa Initial set signals RGB in 1, B RGB in 2, C RGB OUT Connection to the portsComponent Video D Y, E CB/PB F CR/PR Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jack RTSCTS Connecting the cable Communications settingRS-232C Communication Increasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandRS-232C Communication Be EF FB FA Color Temp Gain G Aspect Keystone Mute OSD Bright Hitachi Atago Building
Related manuals
Manual 2 pages 63.85 Kb Manual 2 pages 62.14 Kb

CP-X444, CP-X440 specifications

The Hitachi CP-X440, CP-X444, and CP-X445 projectors are part of Hitachi's highly regarded line of portable projectors designed for professional presentations, educational environments, and corporate meetings. With their robust performance and user-friendly features, these projectors stand out as reliable tools for a variety of applications.

One of the key features of the CP-X440, CP-X444, and CP-X445 is their impressive brightness levels. Equipped with high-lumen output capabilities, these projectors ensure vibrant and clear images even in well-lit environments. With brightness ratings of up to 4000 ANSI lumens, they can effectively project content onto large screens or walls, making them suitable for classrooms, conference rooms, and auditoriums.

Resolution is another critical aspect of these projectors. The CP-X440, CP-X444, and CP-X445 support native XGA resolution (1024 x 768 pixels), providing sharp and detailed images that enhance the viewing experience. This resolution is ideal for displaying presentations, charts, and videos, ensuring that the audience can easily read and understand the content.

In terms of connectivity, these projectors offer a wide range of options to accommodate various devices. They come with multiple input terminals, including HDMI, VGA, and composite video connections, making it easy to connect laptops, DVD players, and other multimedia devices. Additionally, the CP-X445 model features an integrated wireless option, enabling seamless presentation sharing from mobile devices and laptops without the need for cables.

The use of advanced technology is evident in the image quality produced by these projectors. Hitachi's proprietary technology enhances color reproduction and contrast, delivering images that are not only bright but also rich in detail. The projectors also utilize a maintenance-free filter, significantly reducing the need for regular upkeep and prolonging the lifespan of the device.

Portability is an essential characteristic of the CP-X440, CP-X444, and CP-X445 projectors. Their compact design and lightweight construction make them easy to transport, allowing professionals to take them between different venues effortlessly. The projectors also come equipped with a quick-start feature, enabling users to set up and start presentations in no time.

To further enhance usability, these projectors include built-in speakers, providing sufficient audio output for small to medium-sized rooms. The user-friendly interface and remote control make navigation and operation straightforward for users of all skill levels.

In summary, the Hitachi CP-X440, CP-X444, and CP-X445 projectors offer a blend of brightness, resolution, connectivity, and portability, making them ideal choices for various presentation needs. Their advanced features and ease of use ensure that they meet the demands of professionals seeking reliable and effective projection solutions.