Magnavox MDV456/17 owner manual Connecting to a TV only TV has Component Video in Jacks

Connect component video cables (not supplied) to the Player’s COMPONENT VIDEO OUT jacks (Y CR/PR CB/PB) and to the TV’s COMPONENT VIDEO IN jacks. The jacks on the Player are green, red, and blue.

E6170UD_EN_QX4_1217 12/17/04 5:44 PM Page 13

Hookups (cont’d) 13

Connecting to a TV only

TV has COMPONENT VIDEO IN Jacks

4

3

LEFT AUDIO IN

RIGHT AUDIO IN

COMPONENT

VIDEO IN

Y

CR/PR

CB/PB

5

AUDIO OUT L

DIGITAL

COAXIAL

1

2

	Y		CR / PR
			COMPONENT
			VIDEO OUT
R	VIDEO	/ PB	S-VIDEO
	OUT		OUT

1 Connect the supplied red and white audio cable to the Player’s red and white AUDIO OUT jacks and to the TV’s red and white AUDIO IN jacks. Match the cable colors to the jack colors.The right jack is red; the left jack is white.

2

3 Plug in the TV’s power cord.Turn on the TV and set it to the Component Video In channel, which may be near channel zero.

Go to your lowest TV channel (01 or 02) and change channels downward until you find the Component Video In channel. Or, your TV’s remote control may have a button or switch that lets you select the Component Video In channel. If you cannot find it, check your TV owner’s manual.

4 Connect the DVD Player’s power cord to a power outlet. Press STANDBY-ON y to turn on the Player.

You should see the DVD logo on the TV screen. If you do not, check your connections and make sure the TV is on the correct Component Video In channel.

If your TV is compatible with Progressive Scan

Set PROGRESSIVE to ON in the Player’s DISPLAY menu. Details are on pages 9 and 42. “P.SCAN” will appear on the Player’s display panel.

If your TV does not have Progressive Scan, make sure PROGRESSIVE is OFF and “P.SCAN” does not appear on the Player’s display panel.You can set PROGRESSIVE to OFF either in the Display menu or by pressing and holding PLAY B on the front of the Player for more than 5 seconds. Details are on pages 9 and 42.