Input Reset
To reset each input of the IN1502 scaler to its default centering and sizing values, hold down the specific input button until the Input # Reset message is displayed on the LCD screen.
Autoswitch must be set to “OFF” before Input Reset can activated. See “Autoswitch (Autosw) mode” in the “Advanced Configuration” section of this chapter.
System Reset
To reset the IN1502 to all of its default values, hold down the Input 1 button while simultaneously plugging in the power cord. The System Reset message is displayed on the LCD screen.
Front Panel Security Lockout (Executive Mode)
To prevent accidental changes to settings, press the Menu and Next buttons simultaneously for 2 seconds to enable the IN1502’s Executive mode. Executive mode locks all front panel functions except the the input buttons. The menu system still returns to the Default menu when 10 seconds have elapsed. When Executive mode is active, all functions and adjustments can still be made through
To disable the Executive mode, press the Menu and Next buttons simultaneously for 2 seconds.
Enable Executive Mode
Default
Cycle
Press for 2 seconds
MENU
NEXT
EXE MODE
ENABLED
Disable Executive Mode
Default
Cycle
Press for 2 seconds
MENU
NEXT
EXE MODE
DISABLED
10 sec. |
| 10 sec. |
timeout |
| timeout |
The input selection buttons (Input 1 and Input 2) remain functional during Executive mode.