Extron electronic IN1502 manual Command/response table for special function SIS commands

The syntax for setting a special function is X? * X! # where X? is the function number and X! is the

value. To view a function’s setting, use X? # where X? is the function number. In the following table the values of the X? variable are different for each command/function. These values are given in the rightmost column.

Command/response table for special function SIS commands

Command	ASCII Command Response			values
			X!
	(host to scaler)	(scaler to host)	and additional descriptions
PAL file mode (2:2 pulldown detction)
Set mode on	18*1#	PDn1	Set PAL file mode on.
Set mode off	18*0#	PDn0	Set PAL file mode off.
View file mode status	18#	PDn X2	Show PAL file mode status.
Blue mode
Set Blue mode on	8*1#	Blu1	Set Blue mode on.
Set Blue mode off	8*0#	Blu0	Set Blue mode off.
View Blue mode status	8#	Blu X2	Show Blue mode status.

Auto switch

Set Auto switch mode on	10*1#	Aut1
Set Auto switch mode off	10*0#	Aut0
View Auto switch mode status	10#	Aut X2

Set Auto switch mode on. Set Auto switch mode off.

Show Auto switch mode status.

H Format (sync output format)

Set to horizontal sync	15*1#	HFm0	Set H format to off/0
			(horizontal sync, default).
Set to composite sync	15*0#	HFm1	Set H format to on/1
			(composite sync).
View H Format status	15#	HFm X2	Show H format mode status.

IN1502 • Serial Communication 3-7