Emotiva LPA-1 manual Connecting a 5.1 Preamp/Processor

Page 14

Connecting a 5.1 Preamp/Processor

Connection using a 5.1 channel preout to LPA-1 (including LFE Channel)

CD or DVD Player

Cassette or DAT Player

VCR or DVR

Emotiva LMC-1

Emotiva LPA-1

This configuration shows the LPA-1 driving five full range channels and using channels 6 and 7 in a bridged configuration for a non powered subwoofer. This type of configuration is ideal for enthusiasts who have (or will) make their own subwoofer and want to utilize an amplifier that will drive the entire system in one chassis.

Page 14

Image 14

Contents USER’S Guide Table of Contents LPA-1 Technical Specifications Limited Warranty Safety Precautions AV123 NEC National Electrical Code Standards Antenna Grounding Outside the HouseThank You for your LPA-1 Purchase Recording the Serial Number Unpacking the LPA-1Inventory Emotiva LPA-1 Seven Channel Amplifier Front Panel LayoutRear Panel Layout Channels 6 and 7 BridgedPhysical Placement Installation and ConnectionsAC Power Considerations Connection Tips for Superior Sound Input Connection ConsiderationsOutput Connection Considerations Bridging Channels 6Connection using a 7 channel preout to LPA-1 Connection DiagramsConnecting a 7.1 Preamp/Processor Connecting a 5.1 Preamp/Processor Connecting a 5.1 and Second Zone System Connection 5 main channels plus a second 2 channel zoneConnecting Multiple Zones Connection of up to 3 distinct 2 channel zonesConnecting an Expanded Second Zone System 12V Trigger Connections Parallel Series and Parallel Speaker ConnectionsSeries Technical Note about Multiple Speaker Connections Troubleshooting Guide No Sound from one or more speakers connected to the LPA-1Turn-on and turn-off thumps Hum Noises in the SpeakersOne or more RED lights on the Front Panel are Blinking Problems with the whole A/V SystemOther Probable Causes of Noise LPA-1 Technical Specifications AV123 Contact Information Limited WarrantyService Assistance for the LPA-1 Emotiva DisclosureAV123