Emotiva LPA-1 manual AV123

Page 5

The user should not attempt to service the LPA-1 Amplifier beyond the means described in this Owner’s Guide. All other servicing should be referred to qualified service personnel.

To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade

exposure.

Pour preevenir les chocs electriques ne pas utiliser cette fi che polarises avec un prolongateur, un prise de courant ou une autre sortie de courant, sauf si les lames peuvent titre inserees a fond sans laisser aucune parIIIe a decouvert.

Grounding or Polarization — Precautions should be taken so that the grounding or polarization means of the component is not defeated.

This apparatus does not exceed the Class A/Class B (whichever is applicable) limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.

ATTENTION — Le present appareil numerique n’emet pas de bruits radioelectriques depassant las limites applicables aux appareils numeriques de class A/de class B (selon le cas) prescrites dans le reglement sur le brouillage radioelectrique edicts par les ministere des communications du Canada.

For questions regarding service, please contact:

Toll Free - (877) EMO-TECH

Website - www.emotivaaudio.com

If you purchased your unit through AV123 and have service questions, please contact:

AV123

Toll Free -

(877) 543-7500

2150 W. 6th Ave, Suite L

Website -

www.av123.com

Broomfi eld, CO 80020

e-mail -

info@av123.com

WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET

POUSSER JUSQU’AU FOND.

Page 5

Image 5
Contents USER’S Guide Table of Contents LPA-1 Technical Specifications Limited Warranty Safety Precautions AV123 Antenna Grounding Outside the House NEC National Electrical Code StandardsThank You for your LPA-1 Purchase Recording the Serial Number Unpacking the LPA-1Inventory Front Panel Layout Emotiva LPA-1 Seven Channel AmplifierChannels 6 and 7 Bridged Rear Panel LayoutPhysical Placement Installation and ConnectionsAC Power Considerations Output Connection Considerations Input Connection ConsiderationsConnection Tips for Superior Sound Bridging Channels 6Connection using a 7 channel preout to LPA-1 Connection DiagramsConnecting a 7.1 Preamp/Processor Connecting a 5.1 Preamp/Processor Connection 5 main channels plus a second 2 channel zone Connecting a 5.1 and Second Zone SystemConnection of up to 3 distinct 2 channel zones Connecting Multiple ZonesConnecting an Expanded Second Zone System 12V Trigger Connections Parallel Series and Parallel Speaker ConnectionsSeries Technical Note about Multiple Speaker Connections No Sound from one or more speakers connected to the LPA-1 Troubleshooting GuideHum Noises in the Speakers Turn-on and turn-off thumpsOne or more RED lights on the Front Panel are Blinking Problems with the whole A/V SystemOther Probable Causes of Noise LPA-1 Technical Specifications Service Assistance for the LPA-1 Limited WarrantyAV123 Contact Information Emotiva DisclosureAV123