Emotiva manual Unpacking the LPA-1, Inventory, Recording the Serial Number

Page 8

Unpacking the LPA-1

The Emotiva LPA-1 Amplifier should reach you in flawless condition. If you notice any shipping damage or other issues upon unpacking the unit, please contact your Emotiva Retailer immediately.

Inventory

Included with your LPA-1 amplifier should be an IEC Class 1, 2 prong power cord, and this User’s Guide. Please take a moment to make sure all the items are there in the packaging.

Gently lift out the unit and remove all the packing material and accessories. This amplifier is heavy, so please unpack it carefully to avoid unnecessary injury or damage to the amplifier. It is important to save all the packing materials and the box in case your Emotiva LPA-1 ever needs to be moved or shipped back to the factory for service.

Make sure that you keep your sales receipt. It is the only way for Emotiva to establish the duration of your Limited Warranty and it may come in useful for insurance purposes.

Recording the Serial Number

Please read the serial number located on the rear panel and record it below. Also record the place where you purchased this product and the date of purchase.

Model Number

LPA-1

Serial Number

Place of Purchase

Date of Purchase

Page 8

Image 8

Contents USER’S Guide Table of Contents LPA-1 Technical Specifications Limited Warranty Safety Precautions AV123 NEC National Electrical Code Standards Antenna Grounding Outside the HouseThank You for your LPA-1 Purchase Recording the Serial Number Unpacking the LPA-1Inventory Emotiva LPA-1 Seven Channel Amplifier Front Panel LayoutRear Panel Layout Channels 6 and 7 BridgedPhysical Placement Installation and ConnectionsAC Power Considerations Input Connection Considerations Output Connection ConsiderationsConnection Tips for Superior Sound Bridging Channels 6Connection using a 7 channel preout to LPA-1 Connection DiagramsConnecting a 7.1 Preamp/Processor Connecting a 5.1 Preamp/Processor Connecting a 5.1 and Second Zone System Connection 5 main channels plus a second 2 channel zoneConnecting Multiple Zones Connection of up to 3 distinct 2 channel zonesConnecting an Expanded Second Zone System 12V Trigger Connections Parallel Series and Parallel Speaker ConnectionsSeries Technical Note about Multiple Speaker Connections Troubleshooting Guide No Sound from one or more speakers connected to the LPA-1Turn-on and turn-off thumps Hum Noises in the SpeakersOne or more RED lights on the Front Panel are Blinking Problems with the whole A/V SystemOther Probable Causes of Noise LPA-1 Technical Specifications Limited Warranty Service Assistance for the LPA-1AV123 Contact Information Emotiva DisclosureAV123