Emotiva LPA-1 manual Connecting an Expanded Second Zone System

Page 17

Connecting an Expanded Second Zone System

CD or DVD Player

Cassette or DAT Player

VCR or DVR

Powered 5.1 Home Theater Receiver

Audio Distribution Device

(Niles AVDA-3 or similar)

Emotiva LPA-1

Please note that if the receiver does not provide a separate volume control capability for the Zone 2 output, or if it is simply “split” from the front left and right channels, an impedance matching volume control will be necessary to install between the LPA-1 and the speakers in each Zone.

Page 17

Image 17

Contents USER’S Guide Table of Contents LPA-1 Technical Specifications Limited Warranty Safety Precautions AV123 Antenna Grounding Outside the House NEC National Electrical Code StandardsThank You for your LPA-1 Purchase Recording the Serial Number Unpacking the LPA-1Inventory Front Panel Layout Emotiva LPA-1 Seven Channel AmplifierChannels 6 and 7 Bridged Rear Panel LayoutPhysical Placement Installation and ConnectionsAC Power Considerations Output Connection Considerations Input Connection ConsiderationsConnection Tips for Superior Sound Bridging Channels 6Connection using a 7 channel preout to LPA-1 Connection DiagramsConnecting a 7.1 Preamp/Processor Connecting a 5.1 Preamp/Processor Connection 5 main channels plus a second 2 channel zone Connecting a 5.1 and Second Zone SystemConnection of up to 3 distinct 2 channel zones Connecting Multiple ZonesConnecting an Expanded Second Zone System 12V Trigger Connections Parallel Series and Parallel Speaker ConnectionsSeries Technical Note about Multiple Speaker Connections No Sound from one or more speakers connected to the LPA-1 Troubleshooting GuideHum Noises in the Speakers Turn-on and turn-off thumpsOne or more RED lights on the Front Panel are Blinking Problems with the whole A/V SystemOther Probable Causes of Noise LPA-1 Technical Specifications Service Assistance for the LPA-1 Limited WarrantyAV123 Contact Information Emotiva DisclosureAV123