Dynex DX-L321-10A manual Side connections

DX-L321-10A_09-0407_MAN_ENG_V3.book Page 5 Wednesday, May 13, 2009 11:38 AM

TV components 5

## Component Description

4HDMI 1 and 2 jacks Connect an HDMI device, such as a cable box or DVD player, to one of these jacks. An HDMI cable carries both video and audio, so you do not need to make an audio connection. For more information, see “Connecting an HDMI device” on page 9.

5COMPONENT IN (Y, Connect a component video device to

	Pb, Pr) jacks	these jacks. Cables are often color-coded to
		connectors. For more information, see
		“Connecting a component video device” on
		page 10.
6	SPDIF out jack	Connect a digital optical cable from this
		jack to an external digital audio receiver.
7	Audio output jacks	Connect audio cables (L and R) from these
	(L and R)	jacks to an external audio amplifier or
		receiver.
8	Component audio	Connect audio cables (L and R) from an
	input jacks (L and	external audio source, such as a DVD player,
	R) 1 and 2	to these jacks.

Side connections

1

2

3

4

5

##	Component	Description
1	Service port	For service update only. Do not use.
2	PC VGA jack	Connect a 15-pin VGA cable from a
		computer to this jack. For more
		information, see “Connecting a computer”
		on page 10.
3	PC Audio	Connect a mini audio cable from your
		computer sound card AUDIO OUT jack to
		this jack.
4	AV1 and AV2 jacks	Connect the video output from an external
		video device to one of these jacks. For more
		information, see “Connecting a VCR” on
		page 8.
5	Composite audio	Connect audio cables (L and R) from these
	output jacks (L and	jacks to an external analog audio amplifier
	R) 1 and 2	or receiver.

Remote control
1	12
2
	13
3	14
4	15
5	16
6	17
7	18
8	19	20
9
10	21

11 22

#	Button		Description
1		(Power)	Press to turn on your TV. Press again to put
			your TV in Standby mode.
2	Numbers/• (dot)		Press to enter channel numbers or the
			parental control password. Press the • (dot)
			button to select a digital sub-channel.
3	VOL+/VOL–		Press to increase or decrease the volume.
4	FREEZE		Press once to view an image capture of the
			display in a separate screen, while the
			programming continues to run. Press again
			to display the image capture using the
			entire screen. To continue with the regular
			programming display, press the button one
			more time.
5	ENTER		During TV viewing, press to switch to the
			keyed in channel entry. In menu mode,
			press to confirm selections in an on-screen
			menu or to open a submenu.
6	MENU		Press to open the on-screen menu.

7HDMI, COMP, Press HDMI to select the HDMI 1 or HDMI 2

	VIDEO	video input source.
		Press COMP to select the Component 1 or
		Component 2 video input source.
		Press VIDEO to select Video 1 or Video 2 as
		the video input source.
8	MTS/SAP	Press to enable the SAP (Second Audio
		Program) function. This lets you listen to a
		program using an alternative second
		language. Function availability depends on
		your TV provider.