Dynex DX-L321-10A Connecting the power, Connecting an antenna, cable TV, or satellite TV box

DX-L321-10A_09-0407_MAN_ENG_V3.book Page 7 Wednesday, May 13, 2009 11:38 AM

Making connections 7

Programming a universal remote control	Making connections
to work with your TV	Cautions:

You can operate your TV with a new or existing universal remote control.

To program a universal remote control:

1Find the code for your universal remote control by identifying its model (or your set-top box’s remote control manufacturer and model) on the charts below, then make note of the numbered code below it. You will use the numbered code to program your remote control to work with your TV.

Dynex TV codes for universal remote controls

(for all Dynex TVs manufactured after Jan. 1, 2007)

Universal remote control manufacturer and model
Philips	RCA	One for All	Sony
PHDVD5,	RCU807	URC-6690	RM-VL600
PH5DSS,
PMDVR8,
PDVR8
115	135	0464	8043
Set-top box manufacturer and model
Comcast	Dish	Motorola	TIVO	DirectTV
M1057	Network	DRC800	Series 3, HD RC23
	VIP508,
	VIP622
0463	720	0463	0091	10463

Codes for other remote controls are available online at:

www.dynexproducts.com\t-customer_support.aspx

Tips:

•The brand name is often visible on the front of the universal remote control, and the model number is often visible on the back.

•If your universal remote control isn’t listed on the chart, refer to your universal remote control’s instructions and try codes for the brands Orion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may need to try several codes before finding a match.

Check the terminals for position and type before making any connections.

Loose connections can result in image or color problems. Make sure that all connections are tight and secure.

The external audio/video equipment shown in these illustrations may be different from your equipment. If you have questions, refer to the user manual that came with your equipment.

Always turn the power off when connecting external equipment.

Your TV does not support DTS audio format. If you choose a DTS audio format, you may not hear the correct audio output from the TV speakers.

Connecting the power

To connect the power:

•Connect the power cord to the AC in connector on the back of your TV, then plug the cord into an AC power outlet.

Important: Your TV only works on 120 V, 60 Hz power.

Notes:

2Follow your universal remote control’s instructions to enter the code you found in Step 1.

Tips:

•If your universal remote control has a code search feature, run a code search to identify a code that matches your TV. See your universal remote control’s instructions for details.

•If your universal remote control has a “Learn” feature, you can manually program it using your TV remote to “teach” the commands one at a time. See your universal remote control’s instructions for details.

3If all else fails, you must use a different universal remote control that can operate both your set-top box and your TV. Five such remotes are listed on the chart, but many other compatible models are available in the market.

For more help, call technical support for your universal remote control or set-top box manufacturer, or call the Dynex Customer Care Center at 1-800-305-2204.

Your TV should only be operated from the power source indicated on the label.

Always unplug the AC power cord from the AC power outlet when you will not be using your TV for an extended period of time.

Connecting an antenna, cable TV, or satellite TV box

Important: The antenna connector should only be finger-tightened. Do not tighten this connector with any tool, or you may damage your TV.

To connect an antenna, cable TV, or satellite TV box:

1Turn off the TV before connecting the antenna.