Fujitsu PDS4212W-H, PDS4211W-H user manual Safety Measures, Fixing the Display to a Wall or Pillar

SAFETY MEASURES

To prevent accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.

FIXING THE DISPLAY TO A WALL OR PILLAR

You need two strong cords.

Attach a bracket to each hole at the rear of the display

To do this, use screw A (10 mm long) to attach safety bracket A, supplied with the display, to the hole at the rear of the display.

Attach two brackets to the wall

To do this, use screws B (20 mm long) to attach safety brackets B, supplied with the display, to the wall.

*To make sure that the display is stable, attach wall brackets at the same height as (or slightly lower than) the display brackets.

Tie brackets A and B together

To do this, use strong cords to fix the display securely to the wall.

Safety braket A

Screw A

Strong cords (not supplied)

Screw A (10 mm)

Screw B (20 mm)

Safety braket A

Safety braket B

FIXING THE DISPLAY TO THE STAND

Use two screws, supplied with the stand, to fix the display using the holes provided at the rear of the stand.

See the instruction manual for the stand (P-42TT11 type) for more information.

Screw

(supplied with stand)

E-8