Fujitsu PDS4211W-H Selecting Input Mode, Video Input Mode, RGB Input Mode, Press, Input mode

SELECTING INPUT MODE

VIDEO INPUT MODE

1

Press to select a desired

input mode.

Each time you press , a different input mode appears. The sequence is as follows:

Video:	Displays images from equipment
	connected to the Video terminal.
S-video:	Displays images from equipment
	connected to the S-video terminal.

Comp.video: Displays images from equipment connected to the component video input terminal.

*You can switch between video input modes while you are in RGB input mode.

S-video mode

Comp.video mode

English

*You can also use the switches on the display’s control panel to accomplish these steps.

RGB INPUT MODE

1

Press to select a desired

input mode.

Each time you press , a different input mode appears as follows:

RGB1: Displays images from equipment connected to the RGB1 (mD-sub) terminal.

RGB2: Displays images from equipment connected to the RGB2 (BNC x 5) terminal.

*You can switch between RGB input modes while you are in a video input mode.

RGB1 mode

RGB2 mode

*You can also use the switches on the display’s control panel to accomplish these steps.

E-17