Fujitsu PDS4212W-H, PDS4211W-H Others, Minimizing phosphor burn-in Screen saver All modes

EXTENDED FEATURES (Extended menu) (Continued)

• Minimizing phosphor burn-in (Screen saver)					All modes
You can use this option to move the screen position to minimize phosphor-induced “burning”.
Follow the steps below.
	Select “Screen saver” and press			or .
	The “Screen saver” setting screen will appear.
	Press	or	to select “Function”.
	Select a desired pattern.
						“Screen saver” setting screen
	Each time you press or , one of the available choices appears in the following sequence:

Off: Disables screen saver.

Time: Moves the pattern every one hour.

Mode: Moves the pattern when the power is turned ON or when you switch between modes.

Press or to select “Moving area”.

Press or to select the range for moving the pattern.

Each time you press or , one of the available choices appears in the following sequence:

	Narrow: Pattern moves in small range.
	Standard: Pattern moves in moderate range.
	Wide: Pattern moves in wide range.
	Press	when you finish to return to the “Extended menu” screen.
Using screen protection functions (examples)
	When using the display occasionally		When using the display continuously
	Select “Link DPMS” for “White screen”.		When switching between RGB and video input modes only
	Select a desired amount of time for “DPMS”.		occasionally
	Thus, when the display does not receive a signal, it will automatically		Select “Time” for “Function” with “Screen saver”.
	display white over the entire screen. When the predetermined time		Select a desired range for “Moving area” with “Screen saver”.
	elapses, the power will turn OFF.		This causes the screen saver pattern to move in the same range at
			regular intervals.
			When switching between RGB and video input modes
			frequently
			Select “Mode” for “Function” with “Screen saver”.
			Select a desired range for “Moving area” with “Screen saver”.
			This causes the information displayed to move when you switch
			between modes.

OTHERS

When displaying images for shooting in studio

• Adjusting color temperature for reshooting (for broadcasting stations) (Studio mode)

You can use this option to reduce the color temperature to a level suitable for studio use.

Each time you press or , one of the available choices appears in the following sequence:

On Off

On: Adjusts color temperature so that it is appropriate for reshooting.

Off: Specifies the normal color temperature.

When you select “On” for this option, the choice made for “Color temp.” (color temperature) in the

PICTURE Menu will be ignored.

* See P. E-26–E-27 for information on how to specify color temperature.

E-38