Fujitsu PDS4211W-H, PDS4212W-H user manual Installation, When using the stand Front, Front Side

INSTALLATION

To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.

Be sure to use the (optionally available) stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the actual installation.

See the appropriate instruction manual for more information on the installation hardware you select.

To ensure proper heat radiation, provide at least as much space around the display as shown below.

*Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.

*Never attempt to tilt the display sideways or backward.

*To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.

*The display can be installed with either of its sides facing down.

When using the stand

Front		Side
Upper	(cm)	1.5	(cm)
10
10	10		Wall
Left	Right
	6
Floor		Floor

When using the wall-mounting unit (horizontal type) When using the wall-mounting unit (vertical type)

	Front	Side	Front		Side
	(cm)	(cm)	Upper	(cm)	(cm)
			10		Wall mounting unit
	Upper	Wall mounting unit
	10
10	10		10	10
Left	Right	Wall	Left	Right	Wall
	6
	Lower	1.5
			10
			Lower		1.5

* When you install the display lengthwise (rather than in its normal position), you need to adjust the display so that characters will appear properly.

Note

The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing materials originally supplied with the display when repacking it.

Reference

See P. E-40 for more information on options.

E-7

English