Fujitsu P42XHA58E Series, P50XHA58E Series Watching Pictures on the Wide Screen, Press , Size

WATCHING PICTURES ON THE WIDE SCREEN

SWITCHING BETWEEN SCREEN SIZES

1	Press .
	The currently selected mode will appear.

2 

Size.

Press￿￿￿￿￿￿￿￿￿￿￿￿￿to select￿￿￿￿￿￿￿￿￿￿a desired Screen

Each time you press , a different Screen Size Normal mode appears. The sequences used are as follows:

When￿￿￿￿you￿￿are￿￿￿￿￿￿￿￿in a Video input mode

When you are in an RGB input mode

*You can also use the buttons on the display’s control panel to perform these steps.

Wide1 mode

*Depending on the type of signal, some aspects may not be selected.

Note

•When the WIDE mode is set to “Normal”, and pictures are shown for an extended time, a residual image or “burn-in” may be created. The burn-in may occur at the boundary where the left and right borders of the picture meet the vertical bars. To reduce the chance of “burn-in” when watching in the “Normal”, we recommend you set the “Background” to “Light Gray”. (See P. E-26)

•When a residual image was created, it is reduced by using the “White screen” settings. Note that there may also be cases when it can not be recovered completely. (See P. E-26)

•A variety of Screen Sizes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio.

•Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making purposes or for a public audience may constitute a copyright infringement.

For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.

•See P. E-21for how to adjust the picture size and position.

E-12