PART NAMES AND FUNCTIONS
DISPLAY SECTION – FRONT
Power indicator lamp
(Right section)
This lamp shows the state of the power supply.
Lit (red): | |
Lit (green): | Power ON state |
Flashing (red or green): | Malfunction (Flashes differently |
| depending on the type of |
| malfunction.) |
Remote control signal receiver Receives signals from the remote control.
Input mode selector button 
Input mode selector button 
Switches between picture input modes.
Volume + button Volume - button
Adjusts the audio volume.
Wide screen selector button
Switches the screen over to a desired wide screen.
ON/OFF button
Turns the power “ON” and “OFF (standby state)”.
Ambient Sensor
Detects the brightness of ambient light.
It is important not to obstruct it for full functionality of the feature.
DISPLAY SECTION – BACK
External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
When connecting a cable, attach a ferrite core to the cable. (See
P.
* See the speaker instruction manual for more information.
Warning
If the power indicator lamp flashes red or green, this signifies that the plasma display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. In this circumstance, leaving the plasma display power ON can result in fire or electric shock.