Fujitsu P42XHA58E Series, P50XHA58E Series Main Supported Signals, Frequency kHz Frequency Hz

MAIN SUPPORTED SIGNALS

The plasma display can store up to four types of signals for RGB adjustment values. The plasma display uses the first-in, first-out method; therefore, the first input signal is cleared when the fifth one is input.

Input the signal you want to store and adjust to a desired screen according to “ADJUSTING SCREEN POSITION AND SIZE”.

When the adjustment has been made, it is automatically stored. Thus, when the plasma display receives the same signal later, pictures will be displayed in accordance with the adjustment value most recently stored.

Main corresponding signals (RGB mode)

Display (dots x lines)	Horizontal frequency (kHz)	Vertical frequency (Hz)	Signal
640 x 480	31.47	59.94	VGA
640 x 480	37.50	75.00	VGA 75 Hz
640 x 480	43.27	85.01	VGA 85 Hz
720 x 400	31.47	70.09	400 lines
800 x 600	37.88	60.32	SVGA 60 Hz
800 x 600	46.88	75.00	SVGA 75 Hz
800 x 600	53.67	85.06	SVGA 85 Hz
1024 x 768	48.36	60.00	XGA 60 Hz
1024 x 768	60.02	75.03	XGA 75 Hz
1024 x 768	68.68	84.99	XGA 85 Hz
1280 x 1024	63.98	60.02	SXGA 60 Hz
1280 x 1024	79.98	75.03	SXGA 75 Hz
848 x 480	31.02	60.00
852 x 480	31.72	59.97
1360 x 768	47.71	60.01
720 x 485	15.73	59.94	60 fields
720 x 575	15.63	50.00	50 fields

*With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. In this event, match the input signals to another frequency rather than those listed above.

In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals:

Português Italiano Français Español Deutsch English

Main corresponding signals (Comp.video, HDMI mode)

Horizontal	Vertical	Signal	HDMI
frequency (kHz)	frequency (Hz)
15.73	59.94	SDTV 480i
15.63	50.00	SDTV 576i
31.47	59.94	SDTV 480p
31.25	50.00	SDTV 576p
45.00	60.00	HDTV 720p
37.50	50.00	HDTV 720p
33.75	60.00	HDTV 1080i
28.13	50.00	HDTV 1080i

Main corresponding signals (Video, S-video mode)

Horizontal	Vertical	Signal
frequency (kHz)	frequency (Hz)
15.73	59.94	NTSC
15.63	50.00	PAL
15.63	50.00	SECAM
15.63	59.52	PAL60
15.63	50.00	N-PAL
15.73	59.95	M-PAL
15.73	59.94	4.43NTSC

Póññêèé

中文

Note

•Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.

•You can check input signals through “Information” on the FEATURES Menu screen. (See P. E-26.)

•In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.

•All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.

日 本 語

E-29