PREPARING THE INSTALLATION
KBefore proceeding with the installation of this screen, take time to thoroughly read and understand these installation and operation instructions.
KAll electrical wiring installations must conform to local and national codes and should be performed by qualified service personnel.
KThere are no
Preparation
Specifications regarding the individual screen dimensions, weight, mounting type, and controls are provided by the factory when the unit is ordered. Before beginning the installation:
KCheck the specifications for the type of mounting and switch control to be used.
KEnsure that the mounting area and electrical connection are prepared.
KCheck the size and weight of the screen to be installed so that you can plan for the number of people required for the mounting procedure. You need at least four people to mount the smaller screens; more are needed for larger, heavier screens.
You will need:
KEnough ladders for the personnel supporting the screen during the mounting process
KA level
KFasteners appropriate for the surface on which the screen is being mounted (See instructions for the type of mount for recommendations.)
K2 block and tackles or scissor lifts to raise the unit into place
KStandard screwdriver
K7/16” hex head screwdriver
Caution
During installation, do not place the unit on an unstable cart, stand, table, or ladder. The unit may fall, causing injury to a child or adult and damage to the unit.
Model B & Model C Electriscreens: Owner’s Manual | 3 |