Stewart Filmscreen Corp B installation instructions Hanging the Case, Installing the unit

Page 7

STEP 1. HANGING THE CASE

Professional mounting techniques should be adhered to. Stewart Filmscreen Corporation cannot be liable for substandard or faulty installations.

Make sure that you mount the screen so that the electrical box is on the left side (audience left).

Installing the unit

The Model B & Model C Electriscreens are ready to install into the ceiling or soffit. A false ceiling is not intended to support the weight of a Model B & Model C Electriscreens.

The screen can be bolted directly to the support structure or suspended. If the unit is to be mounted to plaster, drywall, masonry, or other type of surface, use an appropriate fastener. (These might include toggle or molly bolts or similar fasteners.)

1.Install the unit onto the support structure making sure that the bottom of the case is flush with the finished ceiling, if any.

2.Make sure the unit is level.

Support Structure

Electrical

Connection

Housing

Figure 1: Model B & Model C Electriscreens

Model B & Model C Electriscreens: Owner’s Manual

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model B & Model C Electriscreens Stewart Filmscreen Corporation Contents About your Model B/Model C Series Electriscreen To the OwnerPreparation Preparing the InstallationUnpacking Factory AdvisoryHanging the Case Installing the unitElectrical HOOK-UP Preparing the connection Installing the low-voltage 3-button switch standardMaking the connection First time operation Operating the ScreenUnderside view Adjusting the Screen ExtensionModifying the extension of the screen General maintenance Screen Care and CleaningReplacement parts and service Problem description Probable cause Action to take TroubleshootingMaintenance Notes Fax 310
Top Page Image Contents