Stewart Filmscreen Corp B installation instructions Adjusting the Screen Extension, Underside view

Page 11

ADJUSTING THE SCREEN EXTENSION

Caution

Improper adjustment of the limits can cause irreparable damage to the screen itself, resulting in voiding the factory warranty.

The extension and retraction limits have been preset at the factory. In general, we advise you to avoid readjusting these limits.

In some cases, to enable proper alignment of the displayed image on the screen, you may need to adjust the extension of the screen. If adjustment to the extension is necessary, carefully follow these instructions.

Warning!

The screen is fully retracted when the batten is flush with the bottom of the case. Do not attempt adjustments with the blue retraction (UP) thumbwheel that will further retract the screen. Incorrect adjustment of the thumbwheel will cause severe screen damage. Please consult the factory if you have any questions.

Thumbwheels

Timing unit assembly; contains limit switches

Figure 3: Underside view

Model B & Model C Electriscreens: Owner’s Manual

9

Image 11
Contents Model B & Model C Electriscreens Stewart Filmscreen Corporation Contents About your Model B/Model C Series Electriscreen To the OwnerPreparation Preparing the InstallationUnpacking Factory AdvisoryHanging the Case Installing the unitElectrical HOOK-UP Making the connection Installing the low-voltage 3-button switch standardPreparing the connection First time operation Operating the ScreenUnderside view Adjusting the Screen ExtensionModifying the extension of the screen Replacement parts and service Screen Care and CleaningGeneral maintenance Problem description Probable cause Action to take TroubleshootingMaintenance Notes Fax 310