STEP 2. ELECTRICAL HOOK-UP
Caution
Professional techniques need to be adhered to when making any electrical connection. A qualified electrician should perform these procedures.
Be sure to follow all standard safety procedures for installing electrical devices.
Do not disassemble or alter the configuration of the motor or the unit's electrical connections. This may cause injury to you or damage to the product.
The electrical connection should be made only to the type of power source indicated on the marking label.
The motor requires standard 120V 60 Hz input (unless an alternate voltage has been specified). All connections are made to the electrical box on the side of the unit (audience left).
There are several kinds of switch controls available. Follow the installation procedure for the type of switch control you will install.
General suggestions for wiring:
KSoldering is recommended.
KThe use of wire nuts is acceptable.
6 | Stewart Filmscreen Corporation |