Instruction Sheet
PN
Model
FOUNDATION Fieldbus® Two-Wire
Conductivity Transmitter
For additional information, please refer to the Instruction Manuals CD shipped with this product, or visit our website at www.emersonprocess.com/raihome/liquid/.
ESSENTIAL INSTRUCTIONS
READ THIS PAGE BEFORE PROCEEDING!
Your purchase from Rosemount Analytical, Inc. has result- | • For clarification of instructions, contact your Rosemount | |
ed in one of the finest instruments available for your par- | representative. | |
ticular application. These instruments have been | • Follow all warnings, cautions, and instructions marked | |
designed, and tested to meet many national and interna- | on and supplied with the product. | |
tional standards. Experience indicates that its perform- | • Use only qualified personnel to install, operate, update, | |
ance is directly related to the quality of the installation and | ||
program and maintain the product. | ||
knowledge of the user in operating and maintaining the | ||
• Educate your personnel in the proper installation, oper- | ||
instrument. To ensure their continued operation to the | ||
ation, and maintenance of the product. | ||
design specifications, personnel should read this manual | ||
• Install equipment as specified in the Installation section | ||
thoroughly before proceeding with installation, commis- | ||
sioning, operation, and maintenance of this instrument. If | of this manual. Follow appropriate local and national | |
this equipment is used in a manner not specified by the | codes. Only connect the product to electrical and pres- | |
manufacturer, the protection provided by it against haz- | sure sources specified in this manual. | |
ards may be impaired. | • Use only factory documented components for repair. | |
• Failure to follow the proper instructions may cause any | Tampering or unauthorized substitution of parts and | |
one of the following situations to occur: Loss of life; per- | procedures can affect the performance and cause | |
sonal injury; property damage; damage to this instru- | unsafe operation of your process. | |
ment; and warranty invalidation. | • All equipment doors must be closed and protective cov- | |
• Ensure that you have received the correct model and | ers must be in place unless qualified personnel are per- | |
options from your purchase order. Verify that this manu- | forming maintenance. | |
al covers your model and options. If not, call | • If this equipment is used in a manner not specified by | |
the manufacturer, the protection provided by it against | ||
| hazards may be impaired. |
WARNING
Substitution of components may impair Intrinsic Safety or suitability for Division 2.
WARNING
Do not remove or replace while circuit is live unless area is known to be
WARNING
To prevent ignition of flammable or combustible atmospheres, disconnect power before servicing or understand and adhere to the manufacturer's live maintenance procedures.
WARNING
Explosion Hazard - Do not disconnect equipment unless area is known to be