Vidikron VP-4200 Audio Output 3.5-mm stereo mini jack, Audio Input 1 3.5-mm stereo mini jack

Page 19

Controls and Functions

1.COMBINATION IN/OUT

Used to control multiple PlasmaView monitors collectively. Use a 6-pin, mini-DIN cable (all pins wired straight-through).

2.Not used.

3.AUDIO (OUTPUT) (3.5-mm stereo mini jack)

Used to output the audio of the selected source component connected to the plasma display to an AV amplifier or similar component. The output level is fixed.

4.AUDIO (INPUT 1) (3.5-mm stereo mini jack)

Connect this jack to the audio output connector(s) of the device connected to INPUT 1.

5.AUDIO (INPUT 2) (3.5-mm stereo mini jack)

Connect this jack to the audio output connector(s) of the device connected to INPUT 2.

6.ANALOG RGB OUT (INPUT 1) (15-pin D-Sub)

If desired, connect this output to the RGB input of a second display device.

This output is not active when the PlasmaView is off or in standby mode.

Note

7.ANALOG RGB IN (INPUT 1) (15-pin D-Sub)

For connecting components that have RGB or component output jacks such as a personal computer or external DTV decoder (a break out cable is needed for BNC-type connection).

8.DIGITAL RGB (INPUT 2) (DVI-D, HDCP-compliant)

VESA-standard digital video input from a personal computer, or digital video from a DVD player or HD set-top box.

9.RS-232 (9-pin, female D-Sub)

Connect the RS-232 output from your computer or automation/control system to this input.

10.DVI VIDEO (INPUT 5) (DVI-D, HDCP-compliant)

This DVI input will process digital video 480p, 720p and 1080i signals (computer rates are not recommended).

11.AUDIO (INPUT 5 / INPUT 4 / INPUT 3) (3.5-mm stereo mini jack)

Used for external audio input from video sources connected to Inputs 5, 4 and 3.

12.INPUT 4

Interlaced or progressive component input (480p to 1080i, 50 or 60 Hz; 480i not recommended – use INPUT 3 instead).

13.INPUT 3 (S-Video or Composite Video Input)

For connecting a VCR, camcorder, laser disc player or DVD player. Use the push button between the two connectors to select S-Video or Composite Video on Input 3 (only one can be active at a time).

14.EXTERNAL SPEAKER OUTPUT (RIGHT)

For connection of an external right speaker with an impedance of 6 ohms.

15.EXTERNAL SPEAKER OUTPUT (LEFT)

For connection of an external left speaker with an impedance of 6 ohms.

16.AC POWER INPUT

Connect the PlasmaView to power here, using the included power cord.

17.MAIN POWER SWITCH

Connects or disconnects the PlasmaView from the AC power source.

Vidikron PlasmaView Owner’s Operating Manual

9

Page 18 Page 20
Image 19
Page 18 Page 20
Contents High Definition Plasma Displays Page Three Year Limited Warranty RIGHTS, Limits and Exclusions Vidikron DOC Compliance Notice Safety Precautions1Table of Contents Serial Communications Maintenance and TroubleshootingSpecifications Operation1List of Figures Audio Output Connection Connecting SpeakersList of Figures About This Manual 1IntroductionPerformance or cause a malfunction Using This ManualInformation about obtaining service They also provide supplemental informationKey Features and Benefits Description, Features and BenefitsIntroduction 2Controls and Functions Controls and IndicatorsPlasmaView at a Glance INPUT/UP Handles at the rear of the panelLeft / VOL and Right / VOL + PlasmaView Model VP-4200 Connector Panel PlasmaView Model VP-5000 Connector Panel Analog RGB OUT Input 1 15-pin D-Sub Audio Output 3.5-mm stereo mini jackAudio Input 1 3.5-mm stereo mini jack Audio Input 2 3.5-mm stereo mini jackPlasmaView Remote Control PlasmaView Remote ControlOFF pin hole Installer Adjust pin holeVolume + Directional ButtonsControls and Functions Approx 23 ft 7m 3InstallationRemote Control OperationInstallation Through Quick SetupStep Procedure For Details, refer to Display propertiesHigh-Altitude Operation Installation ConsiderationsVentilation Requirements for Enclosure Mounting VentilationInstallation RGB/Component Video Input 1 Connection Connections to the PlasmaViewAnalog RGB OUT Input 1 Connection Composite or S-Video Input 3 Connection Component Video Input 4 Connection Attaching the Small Ferrite Cores to Audio Cables 11. Audio Output Connection 13. RS-232 Control System Connection ConnectionInstallation 4Operation Turning on the PowerChanging the OSD Language Setting the Computer Display Properties Selecting an Input Source Viewing Input Signal InformationChanging the Aspect Ratio Description PIX by PIX Using the On-Screen Menus Option PictureScreen Set-UpMain Menu Picture Perform the adjustments in the order listed hereTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness To highlight Image Position ScreenSet-Up PowerPower Turning the picture IndicatorDVI Setup Option Language Refer to Changing the OSD Language onType 3 causes the image to move one pixel at a time PlasmaView, Auto Function becomes active again Option Installer Adjust ModeFAN Speed Auto ISF CCC color mode is pre-set to approximately 3,200K This action is not undoable. Proceed with caution Picture OrientationTo use PIP, press the Split button Using Picture-In-Picture PIPWindows Sub-screen or vice versa. This switches the audioPress the Swap button to replace the main screen with Viewing an Enlarged Area of the Display Enlarging One Part of the ScreenOperation Cleaning the Screen 5Maintenance and TroubleshootingCleaning Troubleshooting TipsFAN Failure OUT of Range Signal NGThermal Alert Shut Down6Serial Communications Serial Command SyntaxArgument 3 bytes Minimum Command Value Range DescriptionMSTS02 Minimum MaximumVideo AudioMSTS09 MSTS08MSTS10 Functional Lock SET-UP Menu CommandsVideo Average Option Menu CommandsPicture Menu Commands Installer Adjust Mode SET-UP Menu Commands Installer Adjust Mode Screen Menu Commands Installer Adjust ModeOption Menu Commands Installer Adjust Mode Contrast MonotoneInput 1... Input DW1 Minimum Maximum Adjustment Commands7Specifications End user except for plasma glass panel Specifications are subject to change without noticeDelivery to the end user PlasmaView Dimensions 25.00 14.00 48.41 49.98 13.98 Specifications Input Refresh Rate Computer/Video Signal CompatibilityHoriz 1152x870 Specifications Page RUMA-009815 Rev -07-07

VP-5000a, VP-5000, VP-4200, VP-6000, VP-6000a specifications

Vidikron, a company known for its commitment to high-quality video solutions, has produced several projectors that cater to different needs and preferences in the realm of home theater systems. The VP-4200A, VP-6000A, VP-6000, VP-4200, and VP-5000 are notable models that incorporate advanced technologies and features designed to deliver exceptional viewing experiences.

The Vidikron VP-4200A is recognized for its impressive brightness and color accuracy. It supports resolutions up to 1080p, making it ideal for high-definition content. One of its standout features is the use of DLP technology, which provides sharp images and vibrant colors, ensuring that viewers experience rich visual depth. The VP-4200A also incorporates a user-friendly interface, allowing for easy adjustments and customization to suit individual preferences.

Moving to the VP-6000A, this model takes performance a step further with enhanced contrast ratios and superior black levels. It is designed for larger viewing environments, capable of producing larger images without compromising quality. The VP-6000A uses advanced image processing technologies, which help to improve picture quality, especially in fast-moving scenes, making it a favorite among action movie aficionados.

The VP-6000 offers similar specifications to the VP-6000A but tends to be slightly more affordable. It still boasts impressive features, including an array of input options such as HDMI and component video, ensuring compatibility with various devices. The strong build quality and reliability of the VP-6000 make it a compelling choice for users looking for durability and performance.

The VP-4200 provides a balance between price and performance, offering excellent image quality while remaining budget-friendly. This model is perfect for users who desire a home theater experience without the high-end price tag. With customizable settings, users can tailor their viewing experience to match their specific needs.

Lastly, the Vidikron VP-5000 stands out with its integration of the latest in video processing technologies. This model supports 4K content, making it a future-proof option as more media becomes available in higher resolution formats. Additionally, the VP-5000's sleek design and advanced connectivity features make it an attractive addition to any home theater setup.

Together, these models represent Vidikron's dedication to delivering high-performance video projectors tailored to various user needs, ensuring that everyone can enjoy a premium viewing experience in the comfort of their homes.
Top Page Image Contents