Vidikron VP-6000a, VP-4200a manual OUT of Range Signal NG, Thermal Alert, Shut Down, FAN Failure

Page 62

Maintenance and Troubleshooting

Table 5-1. Troubleshooting Chart (continued)

Symptom

 

Possible Cause(s)

Solution

 

 

 

 

Picture is okay, but there is no

•

Audio output is muted.

• Press the MUTE button on

sound.

 

 

the remote control.

 

• Volume setting is too low.

• Turn up the volume.

 

•

Source component is

• Check audio connections to

 

 

connected incorrectly or

source component.

 

 

not at all.

 

 

 

 

 

Image is too bright and/or lacks definition in the bright areas of the image.

• Contrast is set too high.

• Lower the contrast setting.

Image appears “washed out” and/or dark areas appear too bright.

• Brightness is set too high.

• Lower the brightness

 

setting.

Colors in the image are swapped; for example, reds appear blue or vice versa.

RGB-HD images appear “noisy.”

•Incorrect color space setting.

•The Pr, Y or Pb outputs from the source to Input 4 on the PlasmaView are incorrect.

•Frequency and Phase settings need adjustment.

•Select the correct color space (refer to Color Space on page 40).

•Ensure that the YPbPr (component) source output connections to Input 4 are correct (see Figure 3-7).

•Manually adjust Frequency and Phase settings, or perform an Auto Setup (refer to Screen on

page 38).

One of the following error messages appears on-screen:

•CAUTION

OUT OF RANGE

•CAUTION UNSUPPORTED SIGNAL

•SIGNAL NG

•The resolution and frequency of the video card in the computer are not compatible with the PlasmaView.

•Select a compatible resolution and vertical frequency (refer to

Computer/Video Signal Compatibility on page 70).

The image is too large or too

• Image size needs adjusting.

• Adjust the image size (refer

small.

 

to Screen on page 38).

 

 

 

One of the following error

• Ambient temperature is too

• Turn off main power.

messages appears on-screen:

high.

Remove any objects

•

WARNING

 

blocking the cooling vents

 

THERMAL ALERT

 

on the PlasmaView and/or

 

SHUT DOWN (**)

 

clean the vents.

•

WARNING

• Cooling fan has

• Immediately turn off

 

FAN FAILURE

malfunctioned.

power, remove the power

 

SHUT DOWN (**)

 

plug from its outlet, and

(“(**)” represents a two-digit

 

consult your Vidikron

error code.)

 

dealer.

52

Vidikron PlasmaView Owner’s Operating Manual

Page 61 Page 63
Image 62
Page 61 Page 63
Contents High Definition Plasma Displays Page Three Year Limited Warranty RIGHTS, Limits and Exclusions Vidikron Safety Precautions DOC Compliance Notice1Table of Contents Operation Maintenance and TroubleshootingSpecifications Serial CommunicationsAudio Output Connection Connecting Speakers 1List of FiguresList of Figures 1Introduction About This ManualThey also provide supplemental information Using This ManualInformation about obtaining service Performance or cause a malfunctionDescription, Features and Benefits Key Features and BenefitsIntroduction PlasmaView at a Glance Controls and Indicators2Controls and Functions Left / VOL and Right / VOL + Handles at the rear of the panelINPUT/UP PlasmaView Model VP-4200 Connector Panel PlasmaView Model VP-5000 Connector Panel Audio Input 2 3.5-mm stereo mini jack Audio Output 3.5-mm stereo mini jackAudio Input 1 3.5-mm stereo mini jack Analog RGB OUT Input 1 15-pin D-SubPlasmaView Remote Control PlasmaView Remote ControlDirectional Buttons Installer Adjust pin holeVolume + OFF pin holeControls and Functions Operation 3InstallationRemote Control Approx 23 ft 7mInstallation Display properties Quick SetupStep Procedure For Details, refer to ThroughInstallation Considerations High-Altitude OperationVentilation Ventilation Requirements for Enclosure MountingInstallation Connections to the PlasmaView RGB/Component Video Input 1 ConnectionAnalog RGB OUT Input 1 Connection Composite or S-Video Input 3 Connection Component Video Input 4 Connection Attaching the Small Ferrite Cores to Audio Cables 11. Audio Output Connection Connection 13. RS-232 Control System ConnectionInstallation Changing the OSD Language Turning on the Power4Operation Selecting an Input Source Viewing Input Signal Information Setting the Computer Display PropertiesChanging the Aspect Ratio Description PIX by PIX Using the On-Screen Menus Set-Up PictureScreen OptionPerform the adjustments in the order listed here Main Menu PictureTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness Screen To highlight Image PositionIndicator PowerPower Turning the picture Set-UpDVI Setup Language Refer to Changing the OSD Language on OptionType 3 causes the image to move one pixel at a time Option Installer Adjust Mode PlasmaView, Auto Function becomes active againFAN Speed Auto ISF CCC color mode is pre-set to approximately 3,200K Picture Orientation This action is not undoable. Proceed with cautionUsing Picture-In-Picture PIP To use PIP, press the Split buttonPress the Swap button to replace the main screen with Sub-screen or vice versa. This switches the audioWindows Enlarging One Part of the Screen Viewing an Enlarged Area of the DisplayOperation Troubleshooting Tips 5Maintenance and TroubleshootingCleaning Cleaning the ScreenShut Down OUT of Range Signal NGThermal Alert FAN FailureArgument 3 bytes Serial Command Syntax6Serial Communications Command Value Range Description MinimumAudio Minimum MaximumVideo MSTS02MSTS10 MSTS08MSTS09 SET-UP Menu Commands Functional LockVideo Option Menu Commands AveragePicture Menu Commands Installer Adjust Mode Option Menu Commands Installer Adjust Mode Screen Menu Commands Installer Adjust ModeSET-UP Menu Commands Installer Adjust Mode Monotone ContrastInput 1... Input Minimum Maximum Adjustment Commands DW17Specifications Delivery to the end user Specifications are subject to change without noticeEnd user except for plasma glass panel PlasmaView Dimensions 25.00 14.00 48.41 49.98 13.98 Specifications Horiz Computer/Video Signal CompatibilityInput Refresh Rate 1152x870 Specifications Page RUMA-009815 Rev -07-07

VP-5000a, VP-5000, VP-4200, VP-6000, VP-6000a specifications

Vidikron, a company known for its commitment to high-quality video solutions, has produced several projectors that cater to different needs and preferences in the realm of home theater systems. The VP-4200A, VP-6000A, VP-6000, VP-4200, and VP-5000 are notable models that incorporate advanced technologies and features designed to deliver exceptional viewing experiences.

The Vidikron VP-4200A is recognized for its impressive brightness and color accuracy. It supports resolutions up to 1080p, making it ideal for high-definition content. One of its standout features is the use of DLP technology, which provides sharp images and vibrant colors, ensuring that viewers experience rich visual depth. The VP-4200A also incorporates a user-friendly interface, allowing for easy adjustments and customization to suit individual preferences.

Moving to the VP-6000A, this model takes performance a step further with enhanced contrast ratios and superior black levels. It is designed for larger viewing environments, capable of producing larger images without compromising quality. The VP-6000A uses advanced image processing technologies, which help to improve picture quality, especially in fast-moving scenes, making it a favorite among action movie aficionados.

The VP-6000 offers similar specifications to the VP-6000A but tends to be slightly more affordable. It still boasts impressive features, including an array of input options such as HDMI and component video, ensuring compatibility with various devices. The strong build quality and reliability of the VP-6000 make it a compelling choice for users looking for durability and performance.

The VP-4200 provides a balance between price and performance, offering excellent image quality while remaining budget-friendly. This model is perfect for users who desire a home theater experience without the high-end price tag. With customizable settings, users can tailor their viewing experience to match their specific needs.

Lastly, the Vidikron VP-5000 stands out with its integration of the latest in video processing technologies. This model supports 4K content, making it a future-proof option as more media becomes available in higher resolution formats. Additionally, the VP-5000's sleek design and advanced connectivity features make it an attractive addition to any home theater setup.

Together, these models represent Vidikron's dedication to delivering high-performance video projectors tailored to various user needs, ensuring that everyone can enjoy a premium viewing experience in the comfort of their homes.
Top Page Image Contents