Vidikron VP-6000a, VP-4200a, VP-5000a manual Minimum Maximum Adjustment Commands, DW1

Serial Communications

Table 6-1. Serial Commands (continued)

	Command	Value Range		Description
ASCII	HEX	Minimum	Maximum

Adjustment Commands

Use these commands in place of a numeric value after a command that requires one, such as the brightness (BRT) command. For example, if the current Brightness setting is 128, you can use either BRTDW0 or BRT118 to reduce the setting by 10.

DW1	44 57 31	–	–	Reduces adjustment value by n
DW2	44 57 32			(n = 1 to 9).
DW3	44 57 33
DW4	44 57 34
DW5	44 57 35
DW6	44 57 36
DW7	44 57 37
DW8	44 57 38
DW9	44 57 39
DW0	44 57 30	–	–	Reduces adjustment value by 10.
DWF	44 57 46	–	–	Sets the adjustment value to the
				minimum value.
UP1	55 50 31	–	–
UP2	55 50 32
UP3	55 50 33
UP4	55 50 34			Adds n to the adjustment value
UP5	55 50 35
				(n = 1 to 9).
UP6	55 50 36
UP7	55 50 37
UP8	55 50 38
UP9	55 50 39
UP0	55 50 30	–	–	Adds 10 to the adjustment value.
UPF	55 50 46	–	–	Sets the adjustment value to maximum.

Notes:

1.When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments.

2.These settings are not stored in memory.

64 Vidikron PlasmaView Owner’s Operating Manual