5Maintenance and Troubleshooting
Regular cleaning will extend the life and performance of the PlasmaView. Before cleaning, be | 5.1 |
sure to unplug the power cord from the power outlet. | Cleaning |
Do not under any circumstances use solvents such as benzene or thinner to clean the | Cleaning the Display Panel |
PlasmaView. Doing so may cause deterioration or peeling of paint from the display or remote | Body and Remote Control |
control unit. |
|
Wipe the display and remote control gently with a soft cloth. In the case of excessive dirt |
|
buildup, dampen a soft cloth with a diluted neutral cleaning detergent and after wringing |
|
the cloth thoroughly, wipe the component and then dry it with a dry soft cloth. |
|
After dusting, wipe the screen gently using the supplied cleaning cloth or another soft cloth | Cleaning the Screen |
(cotton, flannel etc.). Do not use tissue or a rough cloth. The screen surface is easily scratched; |
|
do not rub it or hit it with a hard object. |
|
If you clean the surface of the screen with a wet cloth, water droplets on the surface may |
|
enter into the product and cause a malfunction. |
|
As a general rule, use a vacuum cleaner about once a month to clean the vents on the rear | Cleaning the Vents |
panel of the display of dust buildup (set the vacuum cleaner to its weakest setting when |
|
doing this). If not removed, accumulated dust can cause the internal temperature to increase, |
|
resulting in possible breakdown or fire. |
|
Vidikron PlasmaView Owner’s Operating Manual | 45 |