ViewSonic VS13915-1M warranty Command Description, Set-Function Listing, Set-Function description

Other Information

3. Command Description			ENGLISH
	Length	Total Byte of Message excluding “CR”
	TV ID	Identification for each of TV
	Command Type	Identify command type,
		“s” (0x73h) : Set Command
		“g” (0x67h) : Get Command
		“r” (0x72h) : Reply Command
		“p” (0x70h) : RCU Pass-through
		“+” (0x2Bh) : Valid command Reply
		“-” (0x2Dh) : Invalid command Reply
	Command	Function command code: One byte ASCII code
	Value[1~3]	Three bytes ASCII that defines the value
	CR	0x0D

4. Set-Function Listing

The PC can control the LCD Monitor for specific actions. The Set-Function command allows you to control the LCD monitor behavior in a remote sit through the RS232 port. The Set- Function packet format consists of 11 bytes.

Set-Function description:

Length	Total Byte of Message excluding “CR”
TV ID	Identification for each of TV. The TV ID doesn’t be supported by HDTV “power
	on” command.
	If we want to set all TV settings, TV ID can use “99” to achieve, and it will not
	have Reply command on this function.
Command Type	Identify command type,
	“s” (0x73h) : Set Command
Command	Function command code: One byte ASCII code
Value[1~3]	Three bytes ASCII that defines the value
CR	0x0D

Set-Function format:

Send (Command Type= “s”)

Name	Length	ID	Command	Command	Value1	Value2	Value3	CR
			Type
Byte Count	1 Byte	2 Byte	1 Byte	1 Byte	1 Byte	1 Byte	1 Byte	1 Byte
Bytes order	1	2~3	4	5	6	7	8	9

(Command Type= “s”, Only for HDTV power on)

Name	Length	Command	Command	Value1	Value2	Value3	CR
		Type
Byte Count	1 Byte	1 Byte	1 Byte	1 Byte	1 Byte	1 Byte	1 Byte
Bytes order	1	2	3	4	5	6	7

ViewSonic 38 VT3205LED