ViewSonic VS11857 manual Other Functions

Page 43

9.OTHER FUNCTIONS

1. – ARC - Aspect Ratio Control

Press ARC to adjust different picture format on the screen. Please note: in some sources, some modes are only available. In PC mode , only FULL

and NORMAL modes are available.

FULL:

This mode expands the width of 4:3 video sources evenly to fill the 16:9 screen. There will be distortion at the center of the screen as well as edges.

NORMAL :

This sets the aspect ratio to 4:3 for traditional TV programs. There will be black bars at either side of the screen.

PANORAMIC :

Expands 4:3 video sources to fit the 16:9 screen by expanding the image at the edges of the screen. This creates less distortion at the centre of the screen.

ZOOM 1 (16:9) :

Some DVD movies may not fill the top and bottom of the screen. The 16:9 zoom function extends the height to fill the screen.

ZOOM 2 (14:9) :

In the mode, to display 14:9 broadcasts in the correct proportions. There will be black boards at both sides of the screen.

2.– APC - Automatic Picture Control

Press APC button on the remote control repeatedly to cycle through the APC settings. This is to adjust the brightness and contrast of screen.

*Movie: the contrast is around 0.51 times of standard mode.

*Manual: default brightness is around 0.91 times that of standard mode, and adjustment is available.

*Standard: the standard settings for the best picture.

*Bright: the contrast is around 1.37 times that of standard mode.

ViewSonic

CD3200

40

Image 43

Contents ViewSonic Contents Customer Support Limited Warranty CE Conformity for European Countries For CanadaFollowing information is only for EU-member states Important Safety Instructions Declaration of RoHS Compliance Product disposal at end of product life Copyright InformationOperating Safety Safety and PrecautionsViewSonic Repair Environmental Conditions Point of USEPower Supply ConnectingPrecautions Advantages in relation to CRT cathode ray tube displays ServicePerformance Characteristics IntroductionRS232 Protocal Further featuresIncluded Equipment Interface Connecting External DevicesFunction Key Power indicatorControls and Location Turn The LCD Display OnRemote Control Selecting the primary signal source Summary of Remote Control ButtonsConnections & Applications How do I connect a Video device via Hdmi Hdmi ? How do I connect a PC via D-SUB ? How do I connect a video device via general cables? Setting the Sleep Timer Using Volume ControlUsing Mute Volume ControlVideo button PC/HD buttonScart button Viewing the Menus and ON-SCREEN Displays Picture Modes Picture SettingColor Mode Picture SettingsHUE ViewSonic OFF mode Sound AdjustmentEqualizer Voice POP Rock Jazz Button ManualFunction Multi ModeViewSonic Press the T button to select PIP Function option PIP FunctionSub Main Language Brightness Darken and brighten picture brightness PC MenuColor Mode Mainpc Suboff Other Functions Remote control does not work TroubleshootingPicture is jittery Analog Input PC Input Preset Timing TableVideo Input SpecificationsItems Specification PanelAudio Input FeaturePower DimensionCustomer Support Limited Warranty ViewSonic Table of contentDescription IntroductionSet-Function Listing Set-Function description Length Command Value1 Value2 Value3Length Command Example Set Mute-ON command AsciiCode Hex PC Set-function command to LCD Monitor ID=C0hCommand Value Range Comments Set FunctionUpright Downleft Down Right Get-Function description Get-Function ListingByte Count 00D Bytes order Get Function PC Get-function command to LCD MonitorResponse Range Comments CD3200 Viii MSB LSB Remote Control Pass-through modeName Length RCU-Code1 RCU-Code2 Byte Count 00D Bytes order HEX Baseline RCU Pass-through codesSet Function Command Value Range Comments CD3200 RS-232 Command TableSee Table ASPECT/EXITCD3200 Xiii CD3200 Xiv Pass Through Codes