ViewSonic VS11857 manual Point of USE, Environmental Conditions

Page 10

POINT OF USE

•Keep your LCD display and all units connected to it away from moisture and avoid dust, heat and direct sunlight. Failure to observe these instructions can lead to malfunctions or damage to the LCD display.

•Place and operate all units on a stable, level and vibration-free surface in order to avoid the LCD display from falling.

ENVIRONMENTAL CONDITIONS

•The LCD display can be operated most reliably at ambient temperatures between +41°F and +95°F (5° C to 35° C) and at a relative humidity between 20% and 85% (without condensation).

•When switched off, the LCD display can be stored most reliably between -4°Fand +140°F (-20° C - +60° C), up to the maximum height of 39,000 ft (12,000 m) above sea level at a relative humidity between 10% and 85% (without condensation).

•After transporting your LCD display please wait until it has assumed the ambient temperature before connecting and switching it on. Extremely high variations in the temperature or humidity may result in condensation forming on the inside of the LCD display which could cause an electrical short-circuit.

ViewSonic

CD3200

7

Image 10

Contents ViewSonic Contents Customer Support Limited Warranty CE Conformity for European Countries For CanadaFollowing information is only for EU-member states Important Safety Instructions Declaration of RoHS Compliance Copyright Information Product disposal at end of product lifeOperating Safety Safety and PrecautionsViewSonic Repair Point of USE Environmental ConditionsConnecting Power SupplyPrecautions Introduction ServicePerformance Characteristics Advantages in relation to CRT cathode ray tube displaysFurther features RS232 ProtocalIncluded Equipment Connecting External Devices InterfaceTurn The LCD Display On Power indicatorControls and Location Function KeyRemote Control Summary of Remote Control Buttons Selecting the primary signal sourceConnections & Applications How do I connect a Video device via Hdmi Hdmi ? How do I connect a PC via D-SUB ? How do I connect a video device via general cables? Volume Control Using Volume ControlUsing Mute Setting the Sleep TimerVideo button PC/HD buttonScart button Viewing the Menus and ON-SCREEN Displays Picture Setting Picture ModesColor Mode Picture SettingsHUE ViewSonic Sound Adjustment OFF modeEqualizer Voice POP Rock Jazz Manual ButtonMulti Mode FunctionViewSonic PIP Function Press the T button to select PIP Function optionSub Main Language PC Menu Brightness Darken and brighten picture brightnessColor Mode Mainpc Suboff Other Functions Troubleshooting Remote control does not workPicture is jittery PC Input Preset Timing Table Analog InputPanel SpecificationsItems Specification Video InputDimension FeaturePower Audio InputCustomer Support Limited Warranty Table of content ViewSonicDescription IntroductionSet-Function Listing Example Set Mute-ON command Ascii Length Command Value1 Value2 Value3Length Command Set-Function descriptionSet Function PC Set-function command to LCD Monitor ID=C0hCommand Value Range Comments Code HexUpright Downleft Down Right Get-Function description Get-Function ListingByte Count 00D Bytes order Get Function PC Get-function command to LCD MonitorResponse Range Comments CD3200 Viii MSB LSB Remote Control Pass-through modeName Length RCU-Code1 RCU-Code2 Byte Count 00D Bytes order Baseline RCU Pass-through codes HEXCD3200 RS-232 Command Table Set Function Command Value Range CommentsASPECT/EXIT See TableCD3200 Xiii CD3200 Xiv Pass Through Codes